Installing a tl wr740n router. Connecting and setting up the TP-Link TL-WR740N router

In order to get to the router’s web interface, you need to open your Internet browser and type 192. 168.1.1 in the address bar, Username - admin, Password – admin(provided that the router has factory settings and its IP has not changed).

Changing the factory password

To ensure that no one but you can enter the router settings, you need to change the password to enter the settings.

To do this, select from the menu on the left System Tools(System Tools) – Password(Password) and enter the settings:

1. Previous username: old username, enter admin
2. Previous password: old password, enter admin
3. New username: enter a new username, you can leave admin
4. New Password: enter a new password
5. Confirm new password: confirm the new password

Setting up an Internet connection

In the router interface, you need to go to the tab Net(Network), menu WAN(Here you can add, edit and delete connections).

Setting up a PPPoE connection

1. In field WAN connection type: select PPPoE/Russia PPPoE
2. Username: your login according to the contract
3. Password And Password confirmation: your password according to the agreement
4. Auxiliary connection: Disabled
5. WAN connection mode: Automatic connection
6. Save. The Internet is configured.

Setting up an L2TP connection

1. Type WAN connections: select L2TP/Russia L2TP
2. Username: your login according to the contract
3. Password And Password confirmation: your password according to the agreement
4. We put a point on Dynamic IP
5. IP address/Server name
6. MTU deployment
7. WAN connection mode- Connect automatically
8. After entering the above settings, click Save. The Internet is configured.

Configuring PPtP (VPN) while automatically obtaining a local IP address (DHCP)

1. Type WAN connections: select L2TP/Russia L2TP
2. Username: your login according to the contract
3. Password And Password confirmation: your password according to the agreement
4. We put a point on Dynamic IP
5. IP address/Server name- server address or name (specified in the contract)
6. MTU deployment- change the value to 1450 or less
7. WAN connection mode- Connect automatically
8. After entering the above settings, click Save. The Internet is configured.

Setting up PPtP (VPN) with a static local IP address

1. Type WAN connections: select L2TP/Russia L2TP
2. Username: your login according to the contract
3. Password And Password confirmation: your password according to the agreement
4. We put a point on Static IP
5. IP address/Server name, IP Address, Subnet Mask, Default Gateway, DNS- check this data with your provider
6. MTU deployment- change the value to 1450 or less
7. WAN connection mode- Connect automatically
8. After entering the above settings, click Save. The Internet is configured.

NAT when automatically obtaining an IP address (DHCP)

1. In field WAN connection type: select Dynamic IP
2. Click Save. The Internet is configured.

Setting up Wi-Fi on the router

Setting up a Wi-Fi connection. From the side menu, go to Wireless. In the window that opens, enter the following settings:

1. Network name - the name of your wireless network
2. Region- You can choose Russia, or you can choose nothing. It's not critical.

Setting up Wi-Fi encryption. In the side menu go to Wireless Security:

1. Selecting the encryption type WPA-PSK/WPA2-PSK
2. PSK Password: enter the password for the Wi-Fi network. The password must not be less than 8 characters
3. Click the Save button at the bottom. After saving the settings, you will be prompted to reboot the router; ignore this requirement (red inscription below).

The proliferation of a huge number of devices capable of connecting to the Internet using wireless technologies has led to the fact that the presence of Wi-Fi coverage in a house or apartment has ceased to be something special, but rather has become a necessity. Almost every family has laptops, smartphones and tablets, and all users of these devices need Wi-Fi. Today, creating a wireless network in a small room is very simple; you only need a router. Below we will talk about a budget, but not only because of this, very popular model - TP-Link TL-WR740N. Setting up the router will also be covered.

Possibilities

Before moving on to issues of installing and configuring the router, you should dwell on a description of its main capabilities. This will allow a potential buyer to avoid making a mistake in choosing a device. The characteristics of the TP-Link TL-WR740N, coupled with its low cost, allow this device to claim the title of one of the best solutions for use in an apartment or small house. The device supports modern standards for information transmission in Wi-Fi networks, including 802.11n 2.4 GHz with speeds up to 150 Mbit/s, as well as widely used encryption protocols. Connecting to the Internet can be done using permanent and dynamic IP addresses, as well as through PPPoE, PPTP and L2TP.

Additional functions

Additional useful features include support for IPTV, as well as the ability to broadcast ports. Among other things, the router supports DMZ and UPnP. Setting up the TP-Link TL-WR740N is quite simple, and even a novice user can figure this issue out. Summarizing the above, it is worth noting that this model can be recommended for creating a network of 1-3 computers and several mobile devices, that is, for the usual needs of the average user.

Connection

The first thing that is required after purchasing any router is connecting a cable from the provider to the device, as well as pairing the device with a PC using the patch cord that comes with the router. It is advisable to connect the TP-Link TL-WR740N for setup via a cable, and not Wi-Fi, do not forget about this. There are five connectors on the rear panel of the device, one of which is marked in blue (WAN). It is into this blue connector that the cable from the provider is connected. To connect to a PC or laptop, use any of the yellow connectors (No. 1-4). After the network wires are connected and the router receives power from a 220 V outlet, you need to press the power button located near the connectors and you can proceed to configuration. By the way, the TP-Link TL-WR740N diagram, according to which the router connects to other devices, is displayed on the box.

Establishing an Internet connection

The main function of each router is to distribute the Internet to other devices. Before implementing this feature, you need to configure the TP-Link TL-WR740N to receive Internet from your provider. To do this, you need to use the capabilities of the router's web interface. The settings are accessed at tplinklogin.net or 192.168.0.1, which is entered in the address bar of any Internet browser. After authorization (by default, the login and password correspond to the value admin), a screen will open in which absolutely all parameters of the router are set. The easiest way to quickly connect the Internet to the router is to use the “Quick setup” item. Going to this item will launch a special wizard, following whose instructions you need to determine the network parameters. For most users, setting up the TP-Link TL-WR740N in this option comes down to selecting the country, city and provider in the first step of the wizard.

Wireless Settings

In addition to connecting to the Internet, the setup wizard described above allows you to configure the parameters of the wireless network, represented mainly by the name of the latter, access password, and encryption type. You can set your own parameters, or you can leave the default values. By the way, the default wireless network password is written on a sticker located on the bottom of the device. Once you have completed entering the required data, you must click the “Next” button on the settings screen, and in the next window, click the “Finish” button. After the reboot, the device should connect to the Internet and begin distributing traffic via the wireless network. If this does not happen, you will have to double-check that the settings have been made correctly by running “Quick Setup” again.

Firmware update

Large manufacturers of network equipment, and TP-Link is no exception, are constantly working to improve the software that underlies the operation of their devices. To update the firmware, you must use the “Firmware Update” item in the “System Tools” menu of the router web interface. It is highly advisable to reflash the TP-Link TL-WR740N if a new firmware version is available on the manufacturer’s official website. In most cases, this procedure increases the stability of the router and can also introduce new functions to the device.

Firmware procedure

So, to update the firmware, you need to use the “Firmware Update” tool described above. But before moving on to the procedure, you need to download the firmware file from the manufacturer’s official website. When downloading a file, it is important to take into account the hardware version of the router. Revision information can be found on the device box, as well as on the label located at the bottom of the router case. After the required file is downloaded to the PC disk, you need to go to the update tool screen, click the “Select file” button, specify the path to the firmware in the Explorer window, and then click the “Update” button. The process of rewriting the firmware will begin, and then the router will automatically reboot.

Conclusion

As you can see, the TL-WR740N is a router model that can be recommended to every user with low demands as a basis for creating a home network. At a low cost, this solution seems almost ideal, at least for those who are taking their first steps in the world of computer networks or own a small number of devices that require an Internet connection via Wi-Fi.

In this article we will look in detail at how setting up tp link tl wr740n router. This type of router is very common and is in great demand due to the combination of affordable cost and high-quality technical characteristics.

A special feature of the router is its intended purpose – use only for home networks. This is important to consider: if the area of ​​the house is large enough or the number of devices connecting simultaneously to the wr 740 n router is large, then it may not cope.

Despite this and other disadvantages, the router has proven itself to be excellent. It has:

• Neutral design;
• Execution in matte, discreet tones;
• Wall mounting option;
• The simplicity of configurations is what interests us.

Let's move directly to the points that concern us today - connection, network configurations, wi-fi, etc. Before we begin, let’s note an important detail: if the setup has already been done, you must first reset the parameters. For this purpose, it is recommended to hold down the “Reset” button for 10-15 seconds while the power is on.

Connecting a tp link tl wr740n router to a computer with a cable

Let's look at it in detail how to connect wr740n router via cable. The first step is to connect the power adapter to the installation. After this, we plug the adapter into the electrical network. Now we plug the cable from the Internet provider into the connector marked in blue, called WAN.

Rear panel of tp link wr740n router

Cable for connecting the router to a PC or laptop, usually included with the router

Physical connection diagram

When connecting via ADSL, the wr740n router connects directly to the modem. In this case, the correspondence of the sockets should be as follows: WAN to LAN.

included with the wr740n. Select the WAN connector and connect the router and computer with a cable.

Setting up a tp link tl wr740n router

After making the connection, it's time to think about how configure tp link tl wr740n router. If necessary, you can install the latest firmware. To do this, it is recommended to contact the network resource in advance and download the necessary files.

Important! If to make a connection it was necessary to launch a high-speed option, now there is no need: it will be installed by the router after configuration. It is also important to consider that in cases where the Internet operates through the wr740n router without running various environments and protocols, the service provider uses dynamic IP technology. In this case, configuration is required only for the purpose of creating a wireless network.

To solve this problem, it is necessary to consider the basic settings of the tp link wr740n router. Let's go to the address bar of any available browser and enter the digital combination - 192.168.0.1. Often, instead of 0, you need to enter 1, because older router models support the combination with 1. The standard password and login for entering the configuration menu are admin/admin

login and password on the back of the router

browser address bar, copy and enter http://192.168.0.1 or http://192.168.1.1. and you will enter the router interface

Let's consider in detail, how to configure tp link wr740n router for various types of protocols. To configure the equipment correctly, it is recommended to first check with the service provider the necessary data: user name, login combination - password, ip, etc.

Window for entering login and password. Usually admin/admin

Turning to the settings menu, select “Network”, then “WAN”. In the “connection type” or “Connection type” section, select the value “PPPOE/Russia PPPOE”. You will also need to provide user data - name and password and then confirm it.

After filling out the required fields, you will need to set a confirmation next to the “Dynamic ip” and “Connect automatically” fields (or dynamic ip and connect automatically).

PPPOE protocol with static IP address

PPPOE with a static IP address, register the IP address

Let's look at how to set up a connection PPPOE with static IP address in the wr740n router. The procedure is the same, only instead of “Dynamic ip” you will need to select “Static” or “Static ip”. Additionally, you will need to directly specify the IP address and subnet mask.

As already noted, the provider must provide you with all the data discussed in the article.

Setting up a PPTP connection

To configure the wr740n router to work with the PPTP protocol, go to the “Network” menu again, and then go to the “WAN” tab. Having chosen the option that is already familiar to us, but for the PPTP protocol - “Russia PPTP”, we indicate the other necessary data - username, password, server address.

Other values ​​are set by analogy with the PPPoE protocol.

Important! If the tariff for using network services is limited, then it is recommended to change the “Connect Automatically” value to “Connect on demand”. This option means the following: connection is made on demand, that is, at the time of start of use.

At the end – “Save”.

PPTP protocol with static IP address

The configuration procedure is the same as for dynamic ip, with only one exception - you need to select “Static ip”, and then specify the server address and IP address, as well as the subnet mask.

Other parameters are set in a similar way to PPPOE.

Setting up the L2TP protocol

We work in a way that is already familiar to us:

• “WAN Connection type” - “L2T/Russia L2T”;
• Next, indicate the username and password and confirm it;
• After that, enter the server address;
• We select the connection method - automatic, on demand - the one that is necessary based on the tariff plan.

Setting up an L2TP connection with a static IP address

All steps are similar to the procedure for setting up the wr740n router to work with the L2TP protocol, however, you will need to additionally set the values ​​of the subnet mask, aspen gateway, server address and check the confirmation box next to the “Static ip” line.

Setting up wi-fi connection and password TP-Link TL-WR740N

After the router is configured, a connection to Wi-Fi is made. Connecting the tp link wr740n router to a wireless network and setting the password is carried out according to the following scheme:

• Open the router configuration menu through the address bar, as was done before, and go to the “wireless mode” tab;
• Here we can set the network name, region;
• We can immediately organize the protection of our wireless wi-fi network. Select the section “WPA/WPA2” - “Personal”. Set in order: WPA2-PSK; automatic encryption; We do not touch other configurations. Now all you have to do is come up with your unique password and enter it into the “Wireless network password” field.

Wi-fi password– an important component of the security of the connection being created: this way you can prevent unauthorized attempts to hack and intercept data, as well as use your network.

Change Password And Password reset carried out through the same menu.

Connecting a computer to a wi-fi network

When the router is connected and configured, you need to connect your computer to Wi-Fi. To do this, we will carry out a number of actions:

• Find the wireless network symbol in the lower corner of the toolbar on the desktop and click on it;
• Select our network from the list of available ones;
• After entering the data (password for access), select saving the network and “automatic connection”.

Now configure tp link wr740n router not required: connecting the computer to the network is the final stage.

Conclusion

This article discussed the most important nuances and provisions regarding setting up and connecting the wr740n router, as well as a scheme for setting a password and creating a wi-fi network.

By following the tips and instructions outlined by us, you can easily carry out all the necessary procedures with the tp-link router and enjoy Internet resources at full speed.

Since most Internet users today have more than one device at home that needs to be connected to the network, it will not be possible to use them without a router. In this manual, we will look at the correct configuration of the router using the example of the TL-WR740N model from the popular manufacturer of these devices, TP-Link. This model is widespread and is often used to organize access to the Internet from several devices at home or in a small office. Although it has seven hardware versions, the general principles for setting them up are the same. Also, the action algorithms described here are suitable for most models of TP-Link routers.

Connecting the WR740N router to the network

The WR740N router has four yellow LAN sockets on the back side, intended for connecting computers, and a blue WAN port for connecting to the provider. As well as a connector for the plug of the power supply from the mains.

You need to connect an Internet cable to the WAN port. And to one of the LAN ports - your computer or laptop. Of course, if your device is equipped with a Wi-Fi module, you can use a wireless connection. However, it is recommended to perform all manipulations to configure the router via a cable - this will ensure connection stability and prevent errors from occurring.

LED indication

LED indicators on the front panel of the WR740N router help you understand what is happening with the device. Knowing their meaning will make it easier to set up and use the device.

Let's look at them in order, from left to right.

Power- the indicator shows that the power is on.

SYS“gear” is a system indicator. If it blinks, everything is in order, and if it is not lit, then a system failure has occurred.

WLAN- Wi-Fi network indicator.

Indicators LAN- there are four of them, according to the number of ports. If it is lit, a device is connected to the port. If it blinks, data is being exchanged.

WAN- Internet connection indicator. It works exactly the same as the LAN indicators. If it lights up orange, the connection is without Internet access or not configured.

Indicator WPS. If it blinks slowly, the device is being connected via WPS. Flashes quickly - connection failed.

Quickly configure your router using the Easy Setup Assistant utility

The router comes with an installation CD with the Easy Setup Assistant program for quick setup. It is universal for all models of TP-Link routers.

If you do not have such a disk or your device does not have a drive for reading CD/DVD discs, the program can be downloaded from the manufacturer’s official website.

The program is Russified, so there should be no difficulties in working with it.

Insert the disc and launch the program. We are not connecting the router to the computer yet - the program will ask you to do this later.

It is important to set the “Obtain an IP address automatically” option in your network connection settings. Otherwise, there may be problems connecting to the router.

In the window that opens, select the model of your router (in this case it is TL-WR740N). In the drop-down list, select “Quick Setup Wizard”. In the window that appears after this, you should select Russian.

Click on the “Start” button. After this, you must follow the instructions that appear on the screen and confirm your actions by clicking the “Next” button.

The program will turn off Wi-Fi on your computer and ask you to connect the router using a cable and turn on the power. If everything was done correctly, the network connection will become active. After checking the connection and network status, the program will prompt you to enter Internet connection settings. Your provider should provide these parameters to you.

By default, the program offers WAN settings with a dynamic IP address. You only need to specify your country, region and service provider name. This works for most providers. However, if you have PPPoE or L2TP, in the “WAN connection type” field you must select your connection type and in the next window enter the login and password provided to you by your provider. You may also have to specify a static IP address.

If all parameters have been entered correctly, the router will connect to the Internet. You can check this by launching your browser.

After this, a window will appear asking you to enter Wi-Fi parameters. In principle, you can leave the network name (SSID) as standard, but it is better to change the password. Leave the security level WPA2-PSK in the next window, and enter your password in the box at the very bottom.

Confirm saving the settings and click Finish. Your router is configured and ready to go.

Manually setting up the TP-Link TL-WR740N router

To fine-tune or manually change settings, you may need to configure your router manually. This can be done through the web interface in your browser. No special programs or drivers are needed.

How to enter the router settings

To configure your TP-Link router manually, you need to log into its web interface. To do this, you will need the parameters indicated on the label on the bottom of the device - IP address and password.

Launch the browser and enter the router’s IP in the address bar. Usually this is 192.168.0.1, but on some models, depending on the firmware, it may be 192.168.1.1. In any case, this should be indicated on the sticker. In this case, “http://tplinklogin.net”. But if you cannot connect this way, then select the above options, for example, the figure below shows the connection via “http://192.168.0.1”. The default login and password is admin.

If you still cannot connect, you should set your computer to a static IP version 4 address in the same subnet and try again.

The figure shows an example of IPv4 settings. The computer has a static IP address of 192.168.0.5 selected.

Main menu

After entering your password you will be taken to the main menu page. The interface can be blue or green. This depends on the software version, but the general configuration is standard.

The main menu items are on the left. The menu is Russified. However, even if you come across a router with English-language firmware, working with the interface is intuitive.

Wi-Fi setup

To protect your home network from strangers, it is recommended to immediately change your Wi-Fi settings.

To do this, select the menu item “Wireless mode” (Wireless, if you have English firmware) and the sub-item “Wireless settings”. Here you can change the name of your wireless network. As mentioned above, this is not necessary.

To change the password, select the “Security” sub-item. We don't change anything in the settings. In the “Wireless password” field, enter the password. It must contain at least 8 characters. Click the “Save” button and click on the “Click here to reboot” link. This is necessary for the changes to take effect. After the router reboots, you will need to enter your new password on your computer to connect to the wireless network.

Setting up an Internet connection

You can set up an Internet connection by selecting the WAN sub-item in the “Network” item. There is no point in dwelling in detail on standard configuration with dynamic IP; everything is described in the paragraph on automatic configuration. However, for some providers it is necessary to enter additional parameters, without which the connection will not work.

In principle, you can use the “Quick Setup” menu item and step by step, following the prompts, enter the required parameters. But we will look at manual configuration here for each item separately.

To manually configure an Internet connection, you must select your connection type in the WAN connection type selection field instead of dynamic IP. The page will refresh and additional fields will appear below, depending on the type of setting.

Before you begin making settings, turn off the Internet connection on your computer, if you have one.

Setting up PPTP (VPN)

In the “WAN connection type” field, select PPTP/PPTP Russia if your provider provides a static IP address. Enter your username and password in the appropriate fields. Next, enter the network parameters provided by the provider - address, gateway, subnet mask. In the “MTU Size” item, it is recommended to enter a value of 1450 or less. In the “Connection mode” sub-item, the automatic mode (Connect automatically) must be selected. We do not change the remaining parameters. Now you can click the “Save” button. The connection is configured.

If your provider uses PPTP with a dynamic IP address, the configuration must be performed as for an L2TP connection.

Setting up L2TP (Beeline)

Select the connection type L2TP/ L2TP Russia. Next, enter the data provided by the provider - login, password and server address. If you are setting up a Beeline Internet connection, the address will look like this: tp.internet.beeline.ru. Save the settings and check if the connection is established.

Setting up PPPOE (Rostelecom, Dom.ru)

This type of connection is configured in the same way. Select PPPoE/Russia PPPoE and enter your username and password in the fields that appear. In the “Auxiliary connection” line, check the “Disable” box. Save the settings.

Setting up IPTV

Internet television has become very popular, since the connection speed today allows you to watch online videos in high quality. Therefore, users usually choose routers that support IPTV. This allows you to watch your favorite TV channels from your phone, tablet and any other device. However, not all hardware versions have IPTV support, so before purchasing you should check this issue with the seller or on the manufacturer’s website.

By default, the IPTV function is enabled. To check this, go to the main menu item “Network”, sub-item IPTV. If there is a line there that says IGMP Proxy, then opposite it you should select the value “Enable”. In the figure below, this line is missing. Also, depending on the firmware version, there may also be an IPTV line here. The “Enable IPTV” option should be checked. The connection mode should be set to “Bridge”, but this item is not available in all firmware.

In principle, this is enough for everything to work.

Additionally, you can specify in the list of LAN ports the one that will be used to connect the set-top box.

Once everything is selected, don't forget to click the "Save" button.

Some providers, for example, Rostelecom, will require additional settings. For everything to work, you need to register a VLAN ID, the value of which should be provided to you by your provider.

To do this, in the “Connection mode” item you need to select the “802.1Q Tag VLAN” parameter. In the firmware version with a blue interface, you need to select either “Russia” or “Specify manually”. As already mentioned, such a clause may not exist at all. Then you will have to update the router firmware, but we will discuss this issue separately.

In the field that appears, enter the VLAN ID of the provider. In the VLAN TAG line, check the “Disable” box. Save the settings and enjoy watching.

Changing and resetting your password

If you forgot your password or bought a used router and were not told the password. Then you will have to reset the device settings.

There is a WPS/RESET button on the back panel. To return the router to factory settings, you need to press and hold it for more than 10 seconds.. The SYS LED on the front panel will flash slowly and then quickly. After this, you need to release the button and wait for the router to reboot.

Keep in mind that all settings will be reset, not just the password. Therefore, the router will have to be configured again.

Firmware for TP-Link TL-WR740N router

The need to update the router firmware may arise if it has become unstable or your firmware is outdated and does not have the functions you need.

It is recommended to download the firmware from the official TP-Link website. You can find alternative firmware on the Internet, but you can use them solely at your own peril and risk - the manufacturer declines all warranty obligations in this case.

To download the firmware, go to the TP-Link website and find your router model there. Be sure to check that the firmware matches your hardware version (it is indicated on the sticker at the bottom of the router), because the wrong version can lead to malfunction or damage to the device.

Some users are trying to download drivers for their router. However, drivers for the TL-WR740N, like for any other router, do not exist. The router operates via a network cable without installing special drivers and programs, and the firmware is installed via a web interface.

Firmware should only be installed via a cable connection. During the process, the router will disconnect from the wireless network and this may cause a crash. It is recommended to turn off all Wi-Fi connections while updating the firmware.

To flash the firmware, go to the main menu of your router and find the “System tools” item there, the “Firmware update” sub-item. Then everything is simple - click “Select file” and select the previously unzipped firmware file. Then click the “Update” button. A progress bar will appear on the screen. When it reaches 100%, the router will reboot.

During these manipulations, you cannot turn off the power to the router.

After flashing the microcircuit, your settings will most likely not be saved and you will have to enter them again.

Wireless technologies have long been part of our lives and almost every Internet user has a Wi-Fi router; all providers offer its installation and configuration upon connection. At the same time, situations regularly occur when you need to change the settings of the router, and your own knowledge is not enough, and there is no desire or opportunity to contact technical support. This article details the basic settings of the popular model Wi-Fi router TP-Link WR-740N.

The first thing you need to do is get to the main menu; to do this, open an Internet browser and type 192.168.0.1 in the address bar, after which the device will ask for a login and password. They are printed on a sticker on the bottom side of the case and coincide with each other - this is the word admin.
After entering the password, we are taken to the main settings screen.
Further, the setup will be different for different providers, so we will look at 3 examples for the most popular federal operators - Beeline, Rostelecom and Dom.ru.

Setting up the WR-740N router for Beeline

While on the main screen, click on the “Network” section in the menu on the left, then “WAN”. Beeline uses a secure VPN connection to establish a connection to the Internet, so the settings will be as follows:

• WAN connection type - L2TP or Russia L2TP,
• Server name (IP address) - tp.internet.beeline.ru

Click the “Save” button at the bottom of the screen, wait a minute or two and click the “Connect” button located below the password entry fields. It is important that the Beeline connection, which is in the list of Windows network connections, is not established.

Setting up the WR-740N router for Rostelecom and Dom.ru

These providers provide their users with Internet access through a point-to-point connection, which traces its origins to connections over the telephone network. Again, go to the “Network” section, then “WAN”, but the settings will be different:

• Connection type - PPPoE or Russia PPPoE,
• Username and password - your login and password provided by the provider,
• Secondary connection - Disable,
• Connection mode - Connect automatically.

After the setup is completed, click the “Save” button, after a short pause, refresh the page to make sure that the connection status is now “Connected”. At the same time, the Windows network connection, in this case called “High-Speed ​​Connection,” should also not be activated.

Setting up Wi-Fi on TL WR740N

Since the router is wireless, this function is almost always used. On the main screen, select the “Wireless Mode” menu section, then “Wireless Mode Settings”. The network name (SSID) can be left as default, but it’s better to come up with your own name to make it easier to find it among neighboring Wi-Fi networks. We leave the remaining settings as default.
The next step is very important - setting a password for the Wi-Fi connection. In the “Wireless Mode” section, find the “Wireless Mode Protection” item, where we select the WPA2-Personal option and in the “PSK Password” field, enter a strong password consisting of at least 8 characters. As you know, it is not recommended to set your password to your name, initials, date of birth and consecutive sets of characters such as qwerty.

The best option would be a combination of letters in different cases, numbers and symbols like “_” or “=”. Having set a password, do not forget to apply the settings by clicking the “Save” button.

Setting up IPTV on TL WR740N

Along with the Internet, providers also provide digital television transmission; fortunately, the WR-740N also supports this functionality. Go to the “Network” – “IPTV” section, in the “Mode” list, select “Bridge” and indicate the port to which the TV or set-top box is connected with a cable. There are 4 of them in total and they are numbered, so it won’t be difficult to figure it out.
Next, we save the settings as usual and calmly enjoy all the benefits of modern communications. This concludes our article about TP-Link WR-740N, purchase this device without fear!