Second monitor for Windows 10. How to connect the second, third... tenth monitor to one computer. Is the cable ok?

Today you won’t surprise anyone with a multi-monitor PC configuration. And soon, we can expect that having a single display on a desk will become the exception, not the rule. This is what people say who have had the opportunity to compare the convenience of working at a computer with one and multiple monitors. And the second option, if you believe their words, is much more convenient than the first.

Statisticians share the same opinion. According to their research, if you connect 2 monitors instead of one, the productivity of personnel involved in processing large amounts of information increases by 15-60%. What can we say about gamers, for whom multi-monitor systems are the only opportunity to plunge headlong into the virtual world?

How many monitors can be connected to one computer? Connection conditions

It is unlikely that anyone is able to name the exact number of possible monitor connections to one PC, but 50 or more is definitely possible. It all depends on the budget you are willing to allocate for it. To create video walls from dozens of modules, such as in the photo below, special controllers are used. Their task is not just to display the image on many screens, but also to provide each picture with decent quality.

However, video wall controllers are an extremely expensive solution that not every enterprise can afford. A more affordable option is a video server with several multi-channel video cards. But it can cost the owner several hundred thousand rubles.

The average user, like most of us, does not need such excesses. Home gaming systems usually consist of no more than six monitors, and they can be connected not just to one computer, but to one video card. But in order to achieve the highest possible image quality, it is better to distribute the monitors so that there are no more than two or three per video camera.

Connecting two monitors is supported by almost any modern video card, even one built into the processor (chipset). Three or more - all AMD models, starting with series 5, as well as NVIDIA GTX 600 and newer.

In addition to multi-channel support, the following are important for creating multi-monitor configurations:

• Availability of outputs on video cards that coincide with monitor inputs (the use of adapters is allowed in extreme cases when there is no other way to connect). Moreover, AMD requires a mandatory DisplayPort interface on at least one of the displays (with the exception of certain branded video cards with a built-in DisplayPort-DVI adapter). NVIDIA does not impose such conditions.
• Video driver support for all monitor resolutions.
• Sufficient amount of video memory. 2048 Mb is the conditional minimum for a two- or three-monitor configuration in a non-gaming system. For four or more monitors, especially if you plan to use the computer for games, there should be at least 2 times more memory.
• High data bus bandwidth (from 128 bits) and good memory speed (the more, the better). The narrower the tire, the higher the speed should be.

To connect monitors to different video cards, the latter do not need to be combined into SLI or Crossfire. In some cases, in addition to a discrete card (inserted into the connector), you can use the built-in video if the motherboard BIOS supports it (there is an “Always Enable” option for the built-in video card output). But in such configurations, each pair of displays served by one video chip operates independently of the other. This means that you won't be able to create a common visual space across all screens.

If your computer is equipped with a single video card, you can connect monitors to several of its ports or to one. To connect 2 or more screens to one video card with 1 input, you will need a signal divider - a splitter. For example, as in the photo below. This modification can distribute a signal to 4 monitors, but the picture quality usually decreases (it depends not so much on the splitter as on the video capabilities). If the flow is barely enough for a single screen, dividing it into “rivulets” will reduce the resolution, clarity and scan frequency. And the more connections, the lower the quality.

When you connect the splitter to displays with different resolutions, the picture quality on them will be different: on some it is better, on others it is worse. And you won’t be able to correct it individually, except perhaps through the settings of the monitors themselves.

AMD cards that feature Eyefinity technology (based on the ATI Radeon R800 line of GPUs) allow you to attach up to 6 displays to them and combine them into a single visual space. But here everything is tied to the DisplayPort interface, which, unfortunately, not all devices are equipped with.

The following are acceptable combinations of connection interfaces when building multi-monitor systems using AMD Eyefinity technology:

• To combine 3 monitors into one system, one of them must be connected via DisplayPort or miniDisplayPort (miniDP), the second via DVI, and the third via VGA, HDMI or the same DVI.
• If there are 4 monitors, two devices must be connected to DisplayPort, the third to DVI, and the fourth to VGA or HDMI.
• In a five-monitor system, all 5 or 3 monitors are connected to DisplayPort (miniDisplayPort), one or two to DVI, and one, if any, to HDMI.
• The six-monitor configuration provides a connection via miniDisplayPort only.

NVIDIA Surround/3D Vision multi-monitor support technology allows you to create a shared gaming space from three monitors. However, for this you will need either a dual-processor video card, or combining two or three cards in SLI. You can connect several more displays to the remaining video outputs; they will work independently of the others.

If you do not have the task of building a video wall to display one picture on several screens, it is not necessary to adhere to the rules described above. Monitors can be connected in any configuration through any interfaces, based on 2 devices per 1 video processor. In this case, each of them will display its own desktop, and you can switch between them, drag windows from one desktop to another, etc.

How to connect and configure additional monitors in Windows

Physical connection of devices

The process of physically connecting a second, third, etc. monitor to the video card ports is not difficult. Simply insert the connectors of the connecting cables into the sockets of both devices, remembering to first unplug them from the outlet.

When creating a dual-monitor setup, use the same interfaces whenever possible, for example, DisplayPort only or HDMI only, so that the image quality on the two screens does not differ much. If there are no identical ports on your video card, connect via different ones, for example, DVI and HDMI or HDMI and VGA. It is permissible to use adapters from one interface to another only in extreme cases, since signal conversion is always accompanied by losses, sometimes significant. The same goes for splitters. If you can do without them, try to do without them.

After making the connection, turn on the power to the system unit and monitors. Recognition of the latter, as a rule, occurs automatically. All you have to do is customize them to suit your needs.

Connecting a second monitor to laptops is done in the same way as to desktop PCs. The only difference is that the video card that will serve the additional screen is determined by the system, not the user.

Multi-display adapters

If the picture quality on the main and additional displays varies greatly, and also if you need to connect not one, but 2 additional monitors to your laptop, a specialized device - a multi-display adapter - will help out. This is a small box with a processor inside, reminiscent of a multiport splitter, and several cables included. One cable connects the box to the output of the video card, the rest are connected to the monitor inputs. It receives power from a USB port or an external adapter.

An example of such a device is Matrox DualHead2Go Digital SE.

Setting up additional screens in Windows 10 and 8.1 and 7

After the first turn on, the image on the additional monitor, as a rule, duplicates the main one. Sometimes the desktop stretches across 2 screens at once. To select the desired mode, press the Windows + P (Latin) key combination - this will open the projection panel.

In Windows 10 and 8.1 it looks like this:

In Windows 7 - like this:

The Duplicate option (Repeating) plays the same picture on all displays. “Extend” - makes the second screen a continuation of the first.

If the system was unable to automatically recognize the second display, open “Display Settings” through the desktop context menu.

Click the “Discover” button (In Windows 7, “Find”).

If the device is physically functional and connected correctly, the system will most likely recognize it immediately. If not, open the Multiple Displays list and select "Try anyway to connect..." to a monitor that is not detected.

If this does not help, you should check the contacts and, if possible, connect the device with another known-good cable to another video output or another video card.

The “Define” button in the same section allows you to select which of the two displays will be the main (first) and which will be the additional (second, third, etc.).

To change the settings of one of the displays of a multi-monitor system - the size of the displayed elements, brightness level, orientation, resolution, color rendering, etc., click on the rectangle with its serial number in the gray field under the “Customize your screen” heading.

The changes will take effect after saving. You do not need to restart your computer for this.

Additional multi-display configuration settings are available in the NVIDIA and AMD Catalyst Control Panel menus.

Setting up additional screens in Windows XP

To access display settings in Windows XP, also open the desktop context menu and click “Properties”. Next, go to the “Options” tab.

If the second monitor is correctly recognized, 2 display icons with sequential numbers will appear in the gray field. There is no “Find” option, as in modern versions of Windows.

By default, both screens display the same desktop image. If you want to expand it, click on the second display icon and check the “Extend desktop onto this monitor” checkbox.

Setting up each screen individually is done in the same way as in Windows 10: click on the monitor icon on the gray field and set the desired parameters. The “Screen Resolution” and “Color Quality” options are located here, and the rest - scale, adapter properties, etc., is hidden behind the “Advanced” button.

Most of the settings take effect immediately, but some only after you restart the computer.

This guide shows you the steps you can take to set up a second monitor in Windows 10

The operating system supports multi-monitor systems of various configurations by default, so you don't need to install third-party software to set up multiple displays.

The need to use a second monitor is primarily to expand the workspace, which in some cases makes it easier to perform multiple tasks simultaneously.

It is important to note that some video cards do not support multiple monitors, and that older displays may not always connect automatically.

To connect a second monitor, you need a computer (laptop) or with an additional video output to an external display using various connectors, such as HDMI, VGA, DVI port or DisplayPort, as well as a corresponding cable that connects the monitor to the connector (port).

CONTENT:

Switching between display modes

By connecting the monitors to your computer, you can select the appropriate display mode.

There are four display modes available in Windows 10.

PC screen only

The image will be displayed on the first computer monitor or on the main laptop screen. The second monitor will not be used and nothing will be projected onto it.

Duplicate

The contents of the main monitor are copied to the second monitor. This option is optimal for presentations.

Two monitors turn into one large virtual screen. This makes it possible to display one file, for example, a large photo, on two monitors.

Second screen only

Only the secondary monitor is used. This mode allows you to check the resolution of the second monitor. Accordingly, if you have a laptop from which the presentation is projected onto a large monitor, then choose this option to get optimal results.

Depending on which device you are using, the appropriate display mode will be automatically selected.
When connecting a second monitor to a laptop, the display mode is set by default Repetitive
When you connect a second monitor to your desktop computer, the default display style is set to Expand

To quickly switch between modes, press the keyboard shortcut + P, this will bring up the PROJECT sidebar with four options.

You can also select the display mode using the screen options; to do this, open sequentially: Screen Options

Then on the right side of the window, click on the drop-down list Multiple displays and select one of the items.

After this, save the selected option.

Setting display options

Setting up and managing displays using Windows is very simple, just open: Windows Settings ➯ System ➯ Display, or right-click in an empty area of ​​the desktop and select the item in the context menu that appears Screen Options

Each of the monitors is represented by a small rectangular miniature.

Drag the thumbnails on the screen so that their relative position matches the configuration of the monitors on your desk.

Use zoom to enlarge text and other content. (This is suitable for higher resolutions or for people with vision problems.)

You can also change the desktop resolution.

Select landscape or portrait to change the selected screen orientation.

The multiple display option allows you to switch display modes (as described in the section above).

In additional display settings, you can view general information about connected displays, as well as the properties of the video adapter for the display by clicking on the corresponding link.

Taskbar Settings

When you connect a second monitor, the taskbar appears on all displays by default. You can completely remove the taskbar from one of the monitors or leave only icons of applications running on this monitor on each panel.

To customize taskbars, open: Windows Settings ➯ Personalization ➯ Taskbar, or right-click in an empty area of ​​the taskbar and select the item from the context menu that appears Taskbar options

To make the taskbar appear only on the main monitor, in the section Multiple displays, set the switch Show taskbar on all displays to Off position

If you prefer the default configuration, where each monitor has its own taskbar, you can set the behavior of these taskbars using the drop-down list Show taskbar buttons:

All taskbars

The default mode where the same panel is present on both monitors.

The main taskbar and the taskbar in which a window is open

In this case, the taskbar on the main monitor contains icons of all running applications, while on the second monitor it contains only icons of applications that are running on it. For example, you launched Microsoft Edge and Word on the main monitor, and PowerPoint and Excel were displayed on the second monitor. The taskbar on your main monitor will now contain icons for Microsoft Edge, Word, PowerPoint, and Excel. On the second monitor there will be only PowerPoint and Excel icons.

Taskbar with a window open

In this mode, the taskbar on each monitor will contain only icons of applications running on this monitor. As a result, if we recall the above example again, only the Microsoft Edge and Word application icons will appear on the taskbar of the first monitor, and PowerPoint and Excel on the taskbar of the second monitor.

Background settings on monitors

With a second monitor connected, you can personalize your desktops.

To configure screen design settings, open: Windows Settings ➯ Personalization ➯ Background, or right-click on an empty area of ​​the desktop and select Personalization from the context menu that appears

Then, in the right part of the window, select a suitable background and right-click on it, in the context menu that appears, select one of the menu items, for example Set for monitor 1

In the same way, select the background for the second monitor.

You can also select the position of the wallpaper from the dropdown list Select position

Projection in the operating system Windows 10 And how to connect a second screen.

Hello. Dear readers of the COOL inet website. Today in this post I suggest you analyze one of the functions of the Windows 10 operating system (Windows 10), namely how you can set up projection and connect a second screen to your computer. This could be another screen, a TV, or another PC.

Projecting Windows 10 how to connect a second screen

To connect a second screen you need to open a tab in the lower corner on the right side of the screen notification center to do this, click on the icon that looks like a leaf. In the window that opens, click - Project .

Attention! be careful. You only need to adjust the projection after you connect the second screen!

Notification Center, click Project

Now, in a new window that will open, 4 types of possible projection will be displayed.

Option #1 Computer screen only . In this case, only the screen of this computer is connected.

Option No. 2 Repetitive. In this case, the image on the second screen (monitor) will be exactly the same as on your computer.

Option #3 Expand . Using this projection feature in Windows 10, you can combine one image (picture) from multiple screens.

Option No. 3 Second screen only . With this method, only the 2nd screen connected to the PC will be active. The main computer screen will not be active.

How to connect a second screen

To connect a second screen, you need to go to the very bottom of the window. projection click on connecting to a wireless device . In this case, the second connected device must be active. The device itself will be displayed (its name) in the window.

How to connect devices:

• A modern TV is connected via an HDMI cable. Look on the back panel to see if there is such a connector. Some TV models can be connected using Bluetooth, if available.
• If you need to connect a projector, you can do this using VGA or HDMI cables.
• A PC or laptop can be connected using Bluetooth.

How to turn on Bluetooth?

To connect Bluetooth in Windows 10, you need to go to the tab notification center find and click - Bluetooth . After which this connection will be activated and the corresponding icon will be displayed at the bottom of the screen.

Bluetooth connection

Video Working with multiple monitors in Windows 10

Video One computer - two monitors. How and why?

Video How to turn one computer into two

Windows 10 has a number of features that make multitasking easier and allow you to work with multiple windows at the same time.

Snap

Snap allows you to quickly resize a window, which is especially useful when you want to see two windows at once. To do this, drag the desired window left or right until the cursor reaches the edge of the screen, and then release the mouse button. The window will be fixed in place. To undock a window, simply click and drag the window down.

Note: if you have more than one window open, then when you select the second window, it will automatically dock in the free part of the screen and take its place.

Flip

You can use Flip to switch between open windows. To do this, press and hold the Alt key on your keyboard and, without releasing it, press the Tab key. Continue pressing the Tab key until the window you want is selected.

Task View

The new Task View feature is similar to the Flip feature, but it works a little differently. To open Task View, click on the icon in the lower left corner of the screen, in the taskbar. Alternatively, you can press the Windows + Tab key combination on your keyboard to bring up Task View. A screen will appear where all open windows will be visible and you can click on any window to select.

Virtual desktops

Instead of keeping all your windows on one desktop, you can move some windows to a virtual desktop. This is a new feature in Windows 10 that was not present in previous versions, and is especially useful for managing many windows at once. To create a new desktop, open Task View and then select New Desktop in the lower right corner.

Size of Windows operating system of different versions

Once you have created multiple desktops, you can use Task View to switch between them. You can also move windows between desktops. To do this, open Task View, then click and drag the window to the desired desktop.

To close a virtual desktop, open and click on the X in the top right corner of the desktop you want to close.

Hide/show desktop

If you have a lot of windows open, it may be difficult to see your desktop. In this case, you can click on the narrow button on the right edge of the taskbar. This will minimize all open windows. You can click it again to restore minimized windows.

composs.ru

Doing several things at once in Windows 10

Today we will talk about how to perform multiple tasks at once. In the fast pace of modern life, we have to keep up with a lot, it’s good that our devices help us get things done faster. And now, with Windows 10's Action Center and multitasking tools, the last obstacles between you and finishing every task you start are gone.

Skip app layout on screen

Often, having opened several applications at once, we switched between them while working. With improvements to Windows 10's Snap mode, it's now even easier to position app windows. You can quickly arrange up to four apps on your screen by simply dragging them to the corners. The system will even prompt you to choose which of your open applications should fill in the empty spaces.

Control over your desktop

Sometimes we have to work with many applications, documents and files at the same time. That's why we added a task view button to Windows 10. Now you can view all open windows in a single view with one click. And if you feel like you have too many windows open on one screen, you can create a virtual desktop. This will free up space and allow you to focus on your task.

Unified Notification Center

Sometimes notifications appear on the screens of our devices literally one after another, and it seems as if we completely lose control of what is happening. Notification Center puts all your key settings and notifications in one place, allowing you to quickly reply to an email or change the screen brightness without having to open a separate app.

Windows 10 is the best way to perform common tasks. So don’t waste time: update the system and appreciate its convenience!

Updated February 16, 2017 3:05 am

blogs.windows.com

How to use Snap Assist and snap windows to quarters of the screen in Windows 10

Microsoft developers implemented the Snap function in Windows 7 (then it was called Aero Snap), but in Windows 10 the capabilities of the service have expanded significantly. How to use Snap Assist in Windows 10, and what is this functionality intended for?

What is Snap Assist and what is it for?

With Snap Assist, screen space can be used more efficiently. For example, the function allows you to split the monitor between two application windows vertically. You can also divide the screen into conditional “quarters” and attach an application to each corner. At the same time, the user has access to more information, which significantly increases work efficiency.

“Universal” apps on Windows 10 run in desktop windows. On touch devices, the pinning function is optimized for touch interfaces. In the desktop version, the same functionality is implemented through Snap to maintain uniformity in the interfaces.

How to use Snap Assist

To dock a window, click on the title bar with the left mouse button and hold the button pressed while dragging the window. You need to drag the application window to the right or left side of the monitor. When the window enters the docking area, a translucent frame will appear showing exactly where the app will dock when the key is released. If the position of the window is satisfactory, release the mouse - the window will be fixed in the specified area.

The guide frame appears some time after you click and drag the window. There is no need to wait for it to appear. You can save a few seconds by quickly dragging the window to the left or right side of the monitor. The window will also dock, resizing to take up exactly half the screen area. This part of the functionality works identically to how it happened in earlier versions of Windows - 7 and 8.

If you snap windows by dragging them, a new Windows 10 feature called Snap Assist will launch. The user is shown a panel where all windows currently open are presented. You can click on any of them, and the selected application will automatically go to the second - still free - part of the screen. This approach is much more rational and understandable than the implementation from previous versions of the operating system (each of the windows had to be docked “manually”, repeating the manipulations of selecting an application and dragging it to the desired part of the screen). Due to the ability to “add-select” a program, several precious seconds of user time are saved.

You can also dock windows using hotkeys. To do this, use a combination of Win (the key with the Windows logo) and an arrow (right or left, depending on which part of the screen you want to send the application to). However, you won’t be able to use the Snap Assist functionality with this type of pinning - it is only available when fixing windows by dragging.

Another difference - for the better - from Windows 8 is that "universal" applications can be pinned in the same way as "classic" ones. In Windows 10, they work in “system” windows, which follow general rules.

Vertical fixation

Windows can be docked not only to the right or left - the vertical split screen function is available. In this case, one of the applications will be located in the upper half of the monitor, the other will be fixed at the bottom. You can pin using hotkeys; to do this, press the Win button and the up or down arrow, respectively. Pressing Win and the arrow again will perform a different action. When you select the up arrow, the active window will occupy the entire screen; when you click on the down arrow, the selected application will be minimized on the taskbar.

You cannot achieve the same result by dragging; vertical pinning can only be done using hotkeys. If you try to drag a window to the top of the monitor, the application will expand to full screen. Dragging to the bottom border will not make any changes to the window.

It is worth remembering that the position of the window and its “functionality” depend not only on the quality of the function’s implementation in Windows, but also on the application itself. Thus, some “universal” programs are not very adapted for such use. Fixed vertically or “in quarters”, such applications may not work entirely correctly.

Pinning to quarters of the screen

Thanks to changes in the Snap function, working with large monitors has become even more convenient. Now you can place up to 4 applications on one screen, placing them in a 2x2 pattern, with a window at each corner of the monitor. Similar solutions have already been proposed by various managers for “mosaic” placement of applications, but Microsoft has made this functionality standard and integrated into the operating system out of the box.

To pin an application to a corner of the screen, simply drag the window to the corner (and not to the side, as when pinning horizontally). To fix each new window, dragging will have to be done again; the “assistant” does not work here.

But hotkeys can help again. To pin a window, just press Win + horizontal arrow, and then Win + vertical arrow (for example, Win + left arrow and Win + up arrow will fix the window in the upper left quarter of the monitor).

You don't have to fill your entire monitor with apps. For example, you can keep one or two applications at a minimum size on the left, and fill the right side with a single window that will take up all the allocated space.

windowss10.ru

Customizing windows in Windows 10

Hi all! I continue to disassemble the Windows 10 operating system. Today's topic is Multitasking on Windows 10, and to be more precise, I will talk about window settings in Windows 10. The display of windows can be observed in tablet mode, and you can also display windows by pressing the keyboard shortcut Alt+Tab. Windows are open browser pages or pages on your computer, documents, images, etc.

You can open windows by clicking on the button - Task View, at the bottom of the screen, to the right of the search button.

To get to the window settings page, in the lower left corner of the screen, click on the Start button. In the window that opens, click on the tab - Settings.

In the options menu, click on the tab - System.

On the page - System, in the left menu, click on the tab - Multitasking. Here you can enable or disable the following options:

Automatically arrange windows by dragging them to the sides or corners of the screen.

When you dock a window, automatically resize it to fill the space.

When docking a window, show what can be docked next to it.

When resizing a docked window, simultaneously resize the adjacent docked window.

Also here you can enable the display of windows from virtual desktops, that is, so that windows are displayed on the screen not only from the current desktop, but also from your other desktops. To do this, you just need to select the value - All desktops. The topic of window settings in Windows 10 multitasking is completed, I'm waiting for your comments, see you next time!

Setting up windows in Windows 10 updated: January 13, 2016 by Ilya Zhuravlev

info-effect.ru

Smart windows feature in Windows 7

The Smart Window feature allows the user to view two windows side by side in Windows 7 without having to manually resize the window. This is useful if you don't want to use Alt-Tab to switch between two windows or you need to work with two windows at the same time. Below is an example of what this looks like in Windows 7.

How to use the Smart Window feature

1. Click and drag the top title bar of the first window to the left or right side of the screen and release the window when you see translucent outlines of the window halfway up the screen.

2. Then select another window. Click and drag the 2nd window to the opposite side of the screen, just like the first.

These steps can be done using the Windows key on your keyboard and the right and left arrow keys by following the steps below:

1. With the Windows button pressed on your keyboard, press the Right or Left key. This will move the open window to the left or right side of the screen.

2. Select another window. Using the Windows key as described in the step above, use the opposite (right or left) arrow button.

There are several ways to exit this viewing mode, below are some of the different ways to do so.

1. Click and drag the top of the window and release the mouse. This method will return the window to its normal size.

2. If you press the key combination “Windows+Up Arrow”, the window will open in full screen.

3. Pressing “Windows+Down Arrow” will minimize the active window.

If you decide to connect a second monitor to your computer, you will need a cable selected depending on the characteristics of the device. Many laptops only have a small display port, which requires a special adapter. Otherwise, find the appropriate port for your monitor: HDMI: New monitors are often connected via an HDMI connection. The cable transmits image and sound simultaneously.

VGA: Still common is the VGA port, which allows you to transmit images without sound. For a second monitor this may be quite enough.

DVI: Especially older computers and monitors are still equipped with a DVI connector, which also only allows image transmission.

DisplayPort: One of the modern standards that allows you to transmit high-resolution images and sound. How to Use a Second Monitor on Windows 10 Typically, Windows 10 will automatically detect your second monitor, so it will be ready to use right away. If this does not happen, you will have to configure the hardware first: after connecting the second monitor, press the and keys at the same time. Here are some options for how to proceed: If you want to use both monitors at the same time, you will be interested in the Duplicate and Extend options.

The duplication element displays the contents of the first screen on the second screen.

With the extension option, Windows creates an additional empty desktop on the second screen. To access the second display, move the mouse pointer to the right edge of the screen. Then you can simply move programs and windows from left to right. Windows 10: Setting up a second monitor

In most cases, Windows 10 will configure your monitor correctly. If your computer suddenly displays an error, do the following: Right-click an empty area of ​​your desktop and select Display Settings.

You can change the resolution of the two screens in the Advanced Display Settings section. It is the incorrect resolution that is often the reason that the second monitor does not activate.

If you have additional problems, click the Identify and Detect buttons, and then set the resolution again. Windows 10: Multiple Desktops To open multiple desktops in Windows 10, click the Task View button on the taskbar. The screen will be darkened.

Next, select the “New Desktop” option. Another desktop will open, on which you can work completely independently and use several windows at the same time. Read also: How to connect multiple monitors to a laptop

Choosing the best monitor for a gamer: 4K, WQHD & Full-HD Photo: pexels.com