How does the do not disturb feature on iPhone work? Which iPhone mode is better: silent or do not disturb? How to turn off Do Not Disturb

26.10.2023

iOS provides two ways to prevent your iPhone from ringing in inappropriate situations. For example, you can turn on silent mode (using the switch located on the side) or set up the Do Not Disturb software feature. Both methods mute the sound, but there are significant differences between them, which not everyone knows about.

Silent mode on iPhone

The easiest way to mute your iPhone is to use the switch located above the volume buttons on the left side of the case. Surely many people already instinctively reach for the switch when they go to a cinema, school, church, etc., without even realizing it.

The above method mutes calls, messages, notifications and even games, but the iPhone will still vibrate when there is an incoming call, and the screen will light up when receiving an SMS. You can turn off vibration by going to “Settings” → “Sounds, tactile signals” and moving the switch to the left opposite “Vibration in silent mode”.

Even though vibration will be turned off, the screen will still light up when there is an incoming message.

Do Not Disturb Mode

With Do Not Disturb enabled, your iPhone will remain silent and the screen will remain turned off for incoming calls and messages. However, you can set up exceptions so you don't miss an important call.

ON THIS TOPIC: What happens to calls and SMS when you're in Do Not Disturb mode on your iPhone or iPad.

There are two ways to enable Do Not Disturb mode. The simplest of them is to swipe your finger up from the bottom of the screen, calling up “Control Center”, and click on the crescent-shaped icon.

The crescent icon in the status bar will indicate that Do Not Disturb mode is enabled:

You can also go to “Settings” → “Do not disturb” and slide the switch opposite “Do not disturb”.

You can select a specific time when you want your iPhone (iPad) to go into silent mode (for example, at night from 23:00 to 6:00). In addition, the settings allow you to select contacts from whom you can receive calls even when Do Not Disturb mode is activated. Allow Calls allows you to allow calls from everyone, no one, selected users, or specific groups of contacts.

The “Repeat calls” option allows you to receive repeated calls from particularly persistent ones if they were made within three minutes after the first one. Silent mode allows you to turn off beeps whenever or when your iPhone is locked.

We talked in detail about how to properly set up Do Not Disturb mode on iPhone, iPad and Mac in this material.

When is it recommended to use silent mode or Do Not Disturb mode?

The main difference between the two modes described above is the glowing screen when receiving messages and notifications if silent mode is activated. If you are used to carrying your iPhone in your pocket or bag, then there is nothing easier than turning off the sound by sliding the switch with one movement of your hand. However, keep in mind that vibration can be just as annoying and attention-grabbing as a ringtone.

If you always keep your device in your hand, on your lap, or on a desk, it's best to use Do Not Disturb mode to keep the glowing screen from being noticeable and causing unnecessary attention.

Based on materials from yablyk

Starting with the sixth version, iOS introduced a wonderful “Do Not Disturb” feature, the task of which is to put your iPhone or iPad into silent mode for a certain time. Need I mention how convenient this can be in cases of calls, receiving SMS, notifications or reminders at night?

You can turn Do Not Disturb mode on or off manually. If you use the function on a regular basis, it will be much more convenient to configure Do Not Disturb to automatically turn on/off on your iPhone or iPad.

How to manually enable Do Not Disturb mode on iOS

You can activate the Do Not Disturb mode in two ways:

following the path Settings > Do Not Disturb;
in the control center by clicking on the month icon.

How to Set Up Do Not Disturb Mode on iPhone or iPad

It is quite obvious that turning this mode on/off manually is not very convenient, and you don’t want to miss important calls, so Apple has provided a number of settings for the function.

First we need to follow the following path:

Settings > Do Not Disturb

“Manual” – this toggle switch turns on/off the “Do Not Disturb” mode.
“Scheduled” – the mode will be turned on/off automatically at the specified time.
“Allowing calls” – this section of the settings will allow you to create groups of contacts, calls from which will not be muted.
“Repeated calls” – the call will not be muted if the person calls you a second time within three minutes after the first call.
“Silence” – allows you to choose whether calls and reminders will always be silenced or only if the iPhone or iPad is locked.

Do not disturb mode on an iPhone is a very useful feature that not every owner of an Apple device knows about. It is designed to completely turn off the sound during calls and receive notifications when the device is locked. This mode on the iPhone 5 and other Apple smartphones allows the owner of the gadget to choose at what time and from which subscribers he wants to receive calls.

If you still don’t know what the crescent moon on an iPhone means, we inform you that this sign indicates that the do not disturb function is active. By the way, in other smartphones this icon indicates the device is in sleep mode.

There are two ways to enable or disable this feature:

You need to go to the settings section and select “Do not disturb”.
Select the “Manual” section in the settings, then the mode will turn on instantly, or set up a schedule.

How to change mode settings?

If the owner of an Apple smartphone wants calls and notifications accompanied by sound signals not to disturb him at any particular time of the day, he needs to take care of setting up a schedule. How to do it?

To set up a schedule on your iPhone, you need to do the following steps:

Enter settings.
Select the “Do not disturb” option.
Enable the "Scheduled" section.
Choose the right time.

In addition, wonderful devices from Apple provide a choice of options for the user to receive an alert, a call, or a notification:

1 “call admission” parameter, thanks to which the user can select calls from all subscribers or from some of them (favorite ones). In this case, contacts can be from iCloud or from the phone’s memory. 2 Recall option. When selected, if someone calls the user two or more times in the last 3 minutes, the call will be made with sound so that the iPhone owner does not miss an important call. 3 A parameter, the inclusion of which implies absolute silence and silence of the device during any calls and always (or only when the device is locked).

What happens to iPhone in Do Not Disturb mode?

Many users of Apple devices are interested in the question of what a subscriber sees and hears when trying to call someone if the latter has this mode enabled on their device. And secondly, what the user who is calling will see. Will he be able to understand by certain signs that someone is trying to call him or send him a message? Next, we will lift the veil of secrecy and answer these questions.

A user calling a subscriber with Do Not Disturb mode enabled will constantly hear beeps on the handset indicating that the number is busy. For someone who does not want to receive calls at the moment, the display during a call will not indicate in any way that a call is in progress. The screen will not light up or other characters will appear and the display will be dark. But when the user activates the screen, a message will pop up indicating that a call or SMS was missed. In other words, all incoming calls and SMS will be reflected and saved in history. But their arrival on the device will not be indicated in any way, and this is especially true for sound alerts.

Sometimes the owner of an Apple gadget needs to block calls from a subscriber. This can be done by adding this person to the so-called “black list”. This option is present in the smartphone settings. But it should be said that a blocked subscriber can easily check the availability of a number by calling it from another phone.

How to Block Incoming Calls on iPhone

The blacklist function was already present in the seventh version of iOS, and then was retained in later versions - the eighth, etc. Since then, any iPhone user can send an annoying caller to this list, and this procedure is done very easily. I must say, many Apple fans were happy about this function. But today it is successfully implemented not only in smartphones, but also in regular mobile phones. If you add a contact that is no longer needed to the black list, calls from him will no longer be received.

To blacklist a specific person from your contacts on your Apple smartphone, do the following:

Go to the phone menu, then to recent tabs or to the contacts section.
Click on the contact you are looking for to open information about it.
Go down to the bottom of the window and activate the blocking function for this subscriber. The contact will be blacklisted and you will no longer receive calls from him.

If you subsequently want to unblock one or more subscribers who are on the blacklist, go to the settings menu of your smartphone, select the phone section and the blocked tab. Here you can unblock contacts by performing intuitive actions.

Through the help menu, the user can remove a contact from the list of blocked ones, as well as add new contacts to the black list directly from the address book.

In face time, blocked subscribers can be seen in the settings section of the same name.

If you are blocked...

When calling an iPhone on which the user’s number has been blacklisted, he will first hear a very long beep, which will end abruptly, followed by a series of short beeps. These sounds simulate the number being occupied. Absolutely nothing will be displayed on the device being called.

But, having heard such a combination of sounds when calling someone on a smartphone, you should not immediately think that you have been blocked. To find out why, send a friend an iMessage. For those who don’t know, this is a specialized service from Apple for exchanging messages between users of Apple gadgets. And if, when sending a test SMS, it is not delivered, the system will notify you, this is a clear sign that you have been blocked.

A way to hide your number

If you want to hide your number when calling another subscriber, use a special function on your phone. This feature is often provided by the device manufacturer, but sometimes it is only available through your carrier and is a paid service, although the cost is usually low.

To hide your number from other subscribers to whom you make calls, turn off the number display toggle switch in your phone settings. If in this section you find that the slider is not displayed, then you will have to contact the telecom company for the service.

Do Not Disturb mode appeared in iOS 6. Subsequently, with each new version of iOS, the function changed slightly or did not change at all. In my opinion, this is one of the most useful options of the system.

How I use Do Not Disturb mode

Once upon a time, about 8 years ago, I read a book by Tim Ferriss with a long title, “How to work 4 hours a week and not be stuck in the office “from bell to bell,” live anywhere and get rich.” There flashed a thought that sank into my soul for a long time. I don’t remember the quote, so I’ll give the gist: “There are no letters so important that they cannot be answered later.” Tim suggested answering letters at strictly defined times, on strictly defined days of the week, in order to save time.

It’s the same with calls to my cell phone: I’ve since decided that there can be no super-important calls that I couldn’t answer later. Therefore, when you come to a cinema, theater, sporting event, etc. With a clear conscience, I set the “Do not disturb” mode and enjoy the spectacle. At night, I also set the “Do not disturb” mode and sleep peacefully.

All my friends and relatives know about this and never complain that they had an urgent call. We're used to it. Even the courier from the Labyrinth no longer bothers me with his calls in the morning. And I feel calmer...

How to enable Do Not Disturb mode? Settings

Do Not Disturb mode is enabled:

If the screen is locked, calls will be automatically rejected. The caller will immediately receive a signal that you are “Busy”;
if the screen is locked, all sound alerts will be muted;
if the screen is unlocked, you will see calls and notifications, but the iPhone and iPad will not make any sounds (depending on the settings);
The alarm takes precedence over Do Not Disturb. All your set alarms will go off on time.

There are two ways to enable Do Not Disturb mode:

Swipe up from the bottom of the screen. The Control Center appears, in which you need to click the crescent moon icon.

Second method: you need to turn on the switch in Settings->Do Not Disturb->Manual.

Let's look at the mode settings:

Planned – you can set “Start” and “End” accurate to minutes. During this period, Do Not Disturb mode will turn on automatically.

Call Allowance– here you can specify those groups of contacts that will ignore the “Do not disturb” mode. That is, if a contact, for example, from Favorites calls you, the call will go through.

Attention! To avoid creating groups and set an exception for one person. Go to the Contacts application and find the desired contact. Then go to the “Ringtone” section and turn on the “Boost during emergency” switch. The option is available in . From now on, calls from this contact will bypass Do Not Disturb mode.

Repeated calls– the second call from the same subscriber will go through. This is actually a stupid option, because many people immediately call back if they hear a busy tone. I never turn it on.

Silence– here you indicate whether the iPhone should make sounds when it is unlocked.

Have a good day and good night everyone. :)

iOS developers offer two modes on the iPhone that allow you to protect the user from unwanted messages and calls.

"Silent mode" And "Do not disturb" located in different places in the system, activated in different ways and differ from each other.

Now let’s look at the advantages of each and choose the one that suits your specific purposes.

Silent mode

This mode is activated by a switch on the side of the iPhone. It allows you to quickly turn off all sounds on your device. After activation, the sounds of incoming calls, messages, instant messengers and games will be muted.

Remember that after activating silent mode, vibration in iOS remains enabled; to disable it, you need to go to Settings - Sounds and turn off the switch Vibration in silent mode.

After this, incoming calls will only be signaled by the device’s screen turning on.

Do not disturb

This mode is activated from the menu Settings - Do Not Disturb or through the corresponding button in the control panel, which can be called up anywhere in the system by swiping from below.

In this mode, the iPhone will immediately be completely silent and the screen will not light up when there are incoming calls or messages. Another advantage is the flexible configuration of this mode, which is carried out in the menu Settings - Do Not Disturb.

You can schedule Do Not Disturb to turn on and off automatically at any time.
You can block notifications always or only when the iPhone screen is locked.
It is possible to allow incoming calls from a specific group of contacts, for example, from Favorites.
A separate option allows you to skip a repeat call from one subscriber if it is made within three minutes.
iOS 11 introduced the ability to automatically turn on the mode while driving.

What to choose

It all depends on the scenarios for using the smartphone. If your iPhone is always in sight, in your hands or on the table, it is convenient to use Do Not Disturb mode. This way, nothing will distract you from an important meeting or conversation, and especially important calls will be sent to the device.

In addition, the mode is useful at night to protect the owner from the sound of vibration and the glowing screen.

Silent mode is convenient to enable if you carry the phone in your pocket or jacket, when vibration or screen light will not create additional inconvenience. You can turn on the mode without even looking at your smartphone, but you cannot configure it at your discretion, and to activate/deactivate vibration you will have to constantly look into the system settings.

⭐ Thank you re:Store for useful and interesting information.

Please rate it.

views

Save VKontakte