How to make your own movie in cs go. Working on a movie inside the game

06.12.2023

So, this is an initiation course into movie makers:

First the game settings:

Screen format: 16:9
- Resolution: Set to the best one, because... Everyone's monica is different.
- All graphics to the maximum. (Even if you have a weak computer, then you will understand everything)
- Blur: OFF

First you download the demo. (I think you know how.)
- Rewind to the right moment.
- Remove X-ray(WH) using the "x" button or the "shift + x" combination.

Enter the commands:

1. sv_cheats 1

- 3. host_timescale 0.2

fraps settings:

60 fps
- full-size

After you have done everything, start shooting your frags, it will be slow, but this is for the sake of a smooth picture.
How to capture the frags you will need the program:

How to download this program:

Launch it.
- Click on the “folder” icon and select your video (frags from Fraps).
- In the New Frame Rate scale, set the value to 300 (this is so that when you slow down the video, there will be a smooth picture.

Notes:

Sometimes the Hood may not go away, in this case I just minimize the game and then turn it back on. It usually works
- Fraps and Avi Changar. Their values are proportional. If you shot at 30 fps (fraps value). Then in the game, instead of the command host_timescale 0.2, you must set host_timescale 0.1 (replace 0.2 with 0.1), but in the program you still set the value to new frame rate by 300
- When editing, it is better to slow down the kills and reloading. Think when you do slowdowns and accelerations, otherwise you will have to do everything over again.

Thank you for paying for the course.

ENG:
So, this initiation course muvimeykery:

First, the game settings:

Screen Format: 16:9
- Resolution: Put very best, unnecessarily. Monica are different.
- All graphics on maximum (even if you have a weak PC, then you will understand everything).
- Blur: OFF

First Download the demo (you know how I like.).
- Perematay at the right time.
- Retractable X-ray (WH) using the "x" or combination "shift + x" button.

1. sv_cheats 1
- 2. cl_draw_only_deathnotices 1
- 3. host_timescale 0.2

fraps Settings:

60 fps
- Full-size

After you have done everything starts to take off their kills, but it will be slow for smooth pictures.
As otosnyal frags you need a program:

How to download the program:

Start it.
- Click on the "Folder" and choose your video (frags with frapsa).
- The scale of New Frame Rate vystovlyay value 300 (this is in order that-be when you slow down the video was smooth picture.

Hood may not be able to get out, in this case, I just I turn off the game, then back vklyuchayu.Obychno works
- Fraps and Avi Changar.Ih values proportsionalnye.If you shot in 30 fps (frapsa value) .That the game instead host_timescale 0.2 team is obliged to put host_timescale 0.1 (replacing 0.2 to 0.1), but the program will still put value new frame rate 300
- When installing better to slow down and murder perezaryadku.Dumay when you do slow down and speed up, otherwise you"ll have to do everything knitted.

Thank you for paying for the course.

3-05-2016, 05:14 3 822

How to make a movie/highlight in CS:GO

Required programs

HLAE (optional, but the movies will be of better quality)
VirtualDub
Sony Vegas Pro (can be replaced with another video editor if desired, but Vegas is the best)
Bandicam (optional)
Any video converter (Preferably Movavi, it has better quality)
Adobe Premiere (Optional, for color correction, etc.)
Look for the programs yourself, because Steam doesn’t like piracy :(

Preparing for recording

You need to clear a lot of disk space (5-15 Gigabytes), because the finished videos (After VirtualDub and Sony Vegas will take up about 5-7 gigabytes).
Turn on the "Offline" mode in Steam so that your friends don't get in the way.
If you're with HLAE, set it up. Find lessons on the Internet.
Set the CS:GO settings to maximum (it doesn’t matter if you have a weak computer, the FPS on the movie will not decrease).
Download the game demo.
Turn on the desired round.
Enter commands cl_draw_only_deathnotices 1 ; host_timescale 0 (1 if HLAE is present; without HLAE it will be possible to record sound, for example, with Bandicam) ; host_framerate 75 ((Best number of frames, can be changed) not required for HLAE)
You need to bind the start recording button (if there is no bind) - bind "[" "startmovie z123a" start recording (This name is so as not to confuse the game files with the movie files, the movie files will be at the end of the root folder) and bind " ]" "endmovie" end of recording.

Recording process

10-15 seconds before the desired moment, press the [ button. You will have about 1-2 fps, this is normal. Then, 5-10 seconds after the kills, press ]. Everything freezes for you, but then it postpones. That's it, the game can be turned off.

"gluing" frames into a video

The VirtualDub program will help us here. Let's launch it. Then go to the csgo root folder and open the csgo folder. We are looking for our staff. Drag the first frame into VirtualDub.
If you did it with HLAE, then click on "audio" and select ".WAV audio" and select music. file before the first frame. Click on "Video" and select "Frame Rate". If you recorded with HLAE, then select "Change audio and video to match the length", if you worked without HLAE, then select "Change to" and write the FPS that you selected before recording. Start processing in VirtualDub"e (just click on Play). After processing, click "File" - "Save as Avi".

Installation

Here you decide for yourself what your movie will look like. Open Vegas and drag the finished video into Vegas. You may experience playback lag in Vegas, but that's your PC's problem. You can look for lessons on YouTube, because everything here will take up a lot, a lot of space. After installation, visualize in the format you need. After rendering, open any video converter and upload your video to the converter. This is necessary so that the movie takes up less space, because the video after editing in Vegas will be elephant-sized.
After converting the video, you can upload it to YouTube. Good luck to all:)

HOW TO MAKE A CS:GO MOVIE /// HOW MAKE MOVIE IN CS:GO

HOW TO RECORD A DEMO:

First the game settings:

First you download the demo. (I think you know how.)
- Rewind to the right moment.
- Remove X-ray(WH) using the "x" button or the "shift + x" combination.

Enter the commands:

1. sv_cheats 1
- 3. host_timescale 0.2

fraps settings:

60 fps
- full-size

After you have done everything, start shooting your frags, it will be slow, but this is for the sake of a smooth picture.
How to capture the frags you will need the program:

How to download this program:

Notes:

THANK YOU FOR WATCHING

ENG:
Hello:

First, the game settings:

Screen Format: 16:9
- Resolution: Put very best, unnecessarily. Monica are different.
- All graphics on maximum (even if you have a weak PC, then you will understand everything).
- Blur: OFF

First Download the demo (you know how I like.).
- Rewind at the right time.
- Retractable X-ray (WH) using the "x" or combination "shift + x" button.

Enter commands:

1. sv_cheats 1
- 2. cl_draw_only_deathnotices 1
- 3. host_timescale 0.2

fraps Settings:

60 fps
- Full-size

After you have done everything starts to take off their kills, but it will be slow for smooth pictures.
As filmed frags you need a program:

How to download the program:

Start it.
- Click on the "Folder" and choose your video (frags with frapsa).
- The scale of New Frame Rate display value 300 (this is in order that-be when you slow down the video was smooth picture.

Hood may not be able to get out, in this case, I just I turn off the game, then back ON.Basically works
- Fraps and Avi Changar.Ih values proportsionalnye.If you shot in 30 fps (frapsa value) .That the game instead host_timescale 0.2 team is obliged to put host_timescale 0.1 (replacing 0.2 to 0.1), but the program will still put value new frame rate 300
- When installing better to slow down and murder perezaryadku.Dumay when you do slow down and speed up, otherwise you"ll have to do everything knitted.

Thank you for paying for the course.

Or ShadowPlay (for Nvidia video cards). This software is more suitable for recording let’s play or entertaining videos for YouTube, but it may also be needed for recording a demo.

Sony Vegas. To edit our video.

And also from 10 GB of free hard disk space. Fraps records video in high definition, and the videos have a lot of weight. On average, it is recommended to have at least 100 GB of free hard drive space.

Preparing to record a movie

Let's start by downloading and unpacking the hlae program (link above) into the root folder. Launch the HLAE.exe file. Next, go to Tools - Developer - Custom loader:

We see three lines: HookDLL, ProgramPath and CommandLine. Click the “Browse” button in the HookDLL line. Open the file afxHookSource.dll in the hlae folder

Then click “Brouse” in the ProgramPath line. Go to the root folder of the game and select the csgo.exe file.

And in the CommandLine line we enter the following parameters:

Steam +sv_lan 1 -window -console -game csgo -w 1920 -h 900

The last parameters -w 1920 -h 900 are responsible for the video resolution. Instead of the value 900, you can set 1080, then the movie will appear in full screen. A value of 900 will add black bars at the top and bottom for an extra cinematic effect.

Click “Ok” in the window with hlae parameters and wait for the game to launch with all the necessary parameters.

After starting, you should do the following:

Log off the network. Press Shift+Alt+Tab - List of friends - Your nickname - check the “Offline” box.
Set all graphics to maximum.
Call the console and write in it: exec movie.cfg(to activate the demo player) and host_timescale 1(to turn on sound in the game).

Then we go directly to

Working on a movie inside the game

To start working on the video, we need to record it. Sudden, right?

To record gameplay (or 'demo'), you need to enter record title demo. And after recording the required moment, enter stop.

After recording and saving the demo, open the demo player in the game by pressing Shift+F2. We look for the demo we need and open it.

After starting the demo, the first thing we do is open the console and enter the command mirv_deathmsg debug 1. This command will allow you to track the id of the players who made the kills and the moment of the kill itself.

We wait for a murder to be made on behalf of a certain player, and look at his id in the console.

Having found out the player’s id, we rewind the demo using the player to the beginning of the round and write in the console:

mirv_deathmsg block !player_id *

Instead of “player_id” we indicate the identifier number of the player on whose behalf we need to make a movie. For example, this is player number 5. Then the team will look like this: mirv_deathmsg block !5 *.

With this command we block frags only from player number 5.

Another useful command: mirv_deathmsg cfg noticelifetime DIGIT. Instead of the “NUMBER” value, we can set the time during which a kill like “Player 1 killed Player 2” will be displayed in the upper right corner. We put a number here according to our taste. Time is measured in seconds. Those. By setting “60”, we will get the frag to be displayed for a minute. To ensure that the frag is displayed throughout the round, set the value to “120”.

To prevent the game from lagging when recording, you need to turn off the sound with the command in the console:

host_timescale 0

And turn it on again, but with a different command:

mirv_snd_timescale 1

Yes, this is such a feint with the ears%)

Another important command:

cl_draw_only_deathnotices 1

By typing it into the console, we disable all elements of the demo interface and get a beautiful picture just like in the game:

Then we bind the keys responsible for the beginning and end of the movie recording:

bind "o" "startmovie nazvanie_muvika" - key o is responsible for starting the recording of a movie called name_muvika.

bind "p" "endmovie" - key p is responsible for the end of the record.

To record a movie at 300 frames per second, enter the command in the console:

host_framerate 300

Then we rewind the demo using the demo player to a beautiful place where you got a lot of frags and press the previously prepared bind. In our case, this is the “ o". After clicking, the game starts to slow down a little, and this is normal. The game process is recorded and rendered from the .dem to .tga format. If you can't hear the game's sound or the sound lags during rendering, that's okay too. Sound recording actually occurs clearly, as we will see when we open the rendered file.

Click “ p“ to finish the recording process. We wait until the game delays, close CS:GO and launch the Virtual Dub video editor.

Our movie is located at Counter-Strike Global Offensive > csgo.

It consists of a huge number of pictures in the format. tga and one audio file in . wav. In order for Virtual Dub to properly reproduce all this chaos, open the top image. The rest will be loaded into the file automatically!

Then select Audio from the top menu - Wav audio. And open the sound .wav file of the future movie. If you haven't forgotten yet, it lies in the same root folder of the game.

Then go to Video - Frame Rate. And in the “Adjusting the input frequency” section, in the “Change to” field, indicate the fps that we set via the console when recording the demo.

Set the desired frame rate

All! The movie with sound has been converted into a format that video editors, players and YouTube can read.

The main features that you will need when working with Sony Vegas

To add a video to the Vegas timeline, just drag the video from the folder or click File - Open.
To cut a video into several fragments, use a shortcut key S.
To make a certain moment in slow-mo, select it and, holding Shift, stretch it along the timeline.
To make a transition from one fragment to another, we superimpose the videos on top of each other. If we want to add an additional special effect to the transition, select one of the Vegas presets. Located in the Transitions folder.
To add your music to the background, create a new audio track (Insert - Sound) and drag our mp3 file onto it.

To save the file in maximum quality in the resolution that it was recorded, so that the file weighs not 300 GB, but 30 MB, click File - Properties. In the window that opens, in the Full-Resolution rendering quality line, select Best. In the Width and Height parameters we set 1,920 by 1,080. Or the resolution that you prefer =) Then select the part of the timeline that we want to convert into video, press the right mouse button and Render as. And most importantly: when saving the file, specify the format Windows Media Video V11 (*.wmv). We put 8 Mbps HD 1080-30p Video.

If you have any questions about rendering or recording a demo in CS:GO, write in the comments!

All liked it? Tell your friends!

If you suddenly decide to immortalize your achievements in any match, or simply remove excellent disadvantages from the last game, then this lesson will be useful to you.

How to make a CS GO movie?
As you know, Valve records every match, and it is not difficult to review your game. To quickly play the desired demo, just enter the command in the developer console - playdemo *name*.

To select games played much earlier and play their demos, go to the “Watch” tab, then “Your matches”. Below we see a list of our played games, their results, a map and other information. By clicking download, we will go directly to the game. During the game, using the menu on the left, we can stop the game at a certain moment and customize everything to our liking. The excerpts we need will appear in the game folder.

Having written down the trims you need, you can begin installing them. Movies in CS GO must be dynamic and effective, so we need far from a simple video editor.

The best video editors for videos in CS GO