How to privateize a territory in Minecraft on a server? How to privatize a territory in Minecraft How to fill up a territory

However, not everyone knows how to privatize their buildings and chests. As a result of this, any player easily takes away resources and a house from such people. Many people get upset and leave the servers, but in this article we will tell you in detail how to lock a house in minecraft.

Home privacy on servers in Minecraft varies, but there are no significant differences, so let's get started with home privacy in Minecraft.

How to private a house in Minecraft on a server?

1. First, we need to select the territory that we will privatize.
2. After which we run to one of the corners and begin to dig under ourselves - we need to dig to the lowest point of the desired territory. However, you should not make it private before bedrock; as a rule, privacy on servers is limited. In this case, you may not have enough space. Therefore, it is worth stopping at 6-8 blocks of stone.
3. Once we have dug, enter the command /rg pos1 ( pos1 needs to be written together !), after which we return upstairs and run to the opposite point, located at the other end of the private.
4. We climb to the desired height. The height of the private is as high as possible - as much as the size of the private allows.
5. After reaching the required height, write /rg pos2 (pos2 must be written together!).
6. Next, we need to register /rg claim region_name. The name must be indicated in English letters.
7. If the private has not been created, instead of /rg claim you should write /rg create region_name
8. In this simple and uncomplicated way, we were able to privatize the territory. Stoves and chests will be privateized at the same time as the region, there is no need to enter additional commands. But still It’s better to ask the server administration, on which you play!

How to deprivate a house in Minecraft?

Unprivileging a region is much simpler - it varies on some servers, but the principle is simple.

• Enter /rg delete region_name or /rg remove region_name.
• After that, all buildings are unprivileged and everyone can break them. However, be careful.
• If you deprivate, any other player can deprivate!

That's all, in this article we looked at how to privatize and deprivate a house on a Minecraft PE server!

Attention! To our website:

In Minecraft, you need to take care first of all about security. Many players, playing Minecraft online, ask the same question: “ How to private territory in Minecraft? In this article you will find detailed instructions about private territory on the Minecraft Gamai.Ru server, how to make a child private (region within a region), and how to use protection against user commands. We'd love to see your comments! If we missed something, we will definitely add it at your request.

So, you have found a wonderful place where you want to keep your house. Having chosen the territory where you want to settle, it is advisable to secure it.

To make an area invulnerable, it must first be allocated. Open the chat (Letter T on your keyboard) and enter the command there

//wand

A wooden ax will appear in your inventory. It is they who need to allocate the territory in the form of a cube diagonally.

Selecting a territory in Minecraft

We take an ax and click on the first cube with the LEFT mouse button (in the figure it is “Point 1” - for the top point you can build, for example, a pillar from the ground), then go to the second cube (in the figure - “Point 2”) and click RIGHT mouse button to set the second point. Our recent innovation will greatly help you - illumination of the allocated area.

After this, the region must be named somehow:

/region claim (region_name)

We call the region whatever you like, but without spaces.

For example:

/region claim gamai

Now your region is completely protected from other players. No one will be able to destroy or build on your territory unless you invite a player to do so.

Protecting the territory from creepers, fire, mobs

To protect your territory from creepers, TNT, mobs, fire and all sorts of other destruction, you need to set flags for your territory.

To set the flag we write the following:

/region flag (region_name) (flag) (constant)

(region_name) is the region you created

(constant) - deny-prohibited, allow-allowed, none-no constant.

For example:

/region flag gamai creeper-explosion deny

This command will prevent creepers from destroying your territory when they explode.

By default, all flags are enabled - allow.

List of flags for protecting territory:

Flags available to players (on some servers, some of the flags are available only to VIP players):

• pvp- attack by other players
  
• sleep
• tnt- ability to explode tnt
• creeper-explosion— the creeper explosion destroys the territory or not
• lighter
• lava-flow- can lava flow?
• potion-splash- damage from potions
• ghast-fireball- fireball damage

• pvp- attack by other players
• enderman-grief- ability to griefer endermans
• lighter- ability to set fire with a lighter
• lightning- lightning can destroy your building
• use— possibility of using mechanisms (doors, plates, etc.)
• water-flow- can water flow?
• lava-flow- can lava flow?
• potion-splash- damage from potions
• sleep- players can/cannot sleep in your zone
• ghast-fireball- fireball damage

If you did everything correctly, your region has become invulnerable.

So, to protect your territory you need to do only three things:

1. Enter the command //wand and select the territory in the form of a cube with the left and right mouse button.
2. Register the selected territory with the command /region claim region_name
3. Specify the required flags with the command /region flag (region_name) (flag) (constant)

How to add/remove another player?

You can add another player (overlord) so that you can build/destroy together with the following command:

/region addmember region_name player_nick

Removing a player:

/region removemember region_name player_nick

To find out who is the co-owner of your territory, you can type the command

/region info region_name

How to remember the name of your region?

Take the rope in your hand and right-click on the welded area.

or enter the command

/rg list

(you can /region list)

How to remove visual highlighting of an area?

Enter the command //sel (yes, with two slashes).

To select your region again, type the command

/rg select region_name

Special teams

What to do if you have a powerful stack of spawners and you don’t want any of the VIP users to change the mob spawner? In this case, you can prohibit one command from changing the spawner

rg flag rg_name blocked-cmds /spawner

or prohibit the execution of any command except one, for example, returning to spawn:

rg flag rg_name allowed-cmds /spawn

Use this flag with caution and be fully aware of what you are doing!

How to delete your region?

Your region is deleted using the command:

/region delete region_name

Thus, you know how to private a territory on the Minecraft Gamai.ru server.

We wish you a pleasant game and incredible buildings!

How to reassign a region (move, shift, resize)?

If you need to make some changes to the region, for example, make it larger, then you don’t have to delete it!

Select a new zone using //wand (or /rg select region_name), make adjustments and run the command:

/region redefine region-name

or

/region move region-name

or

/region update region-name

Now the region has been changed, but all flags are retained from the old region.

How to make a child region (region within a region)?

This function will mainly be useful to mayors, because They have a very huge allocated area for the city.

If you have a main region, for example “reg1”, and you do not want to give your friend full access to the region, then you can simply set aside for him some small area in the “reg1” zone.

To do this you need to be the Owner of “reg1”:

/rg addowner region owner_nick

Now you can start selecting a region for a friend (player) using //wand, and then:

/rg claim region_name_for_friend

After this, make the new region (for example “reg2”) a child of the region “reg1”:

/region setparent child_region primary_region

or

/region parent child_region main_region

or

/region par child_region main_region

Eg:

/region setparent reg2 reg1

Now the region reg2 belongs to the region reg1, and if reg1 is deleted, all the regions attached to it will be deleted.

Each child region can have its own flags, regardless of the flags, but to avoid flag conflicts between the child and main regions, the priority must be specified for the child region:

/region setpriority child_region priority_number

Eg:

/region setpriority reg2 20

The default primary region priority is 0.

The private settlement itself is a process in which a certain part of the area in the world is highlighted and described by a list of commands. These commands will eliminate the influence of others on the selected territory. That is, only the owner himself will have the right to change anything in his settlement. And then users will learn how to private a house in Minecraft on a server from other players. This need exists due to the activity of insidious griefers who constantly rob and destroy buildings on servers.

About griefers

Who are griefers really? In general, griefing refers to any moral or material damage caused to people in the in-game space. In Minecraft, a griefer is someone who constantly destroys other people's buildings or makes some harmful, unauthorized changes, and sometimes kills players. In most cases, this happens with the aim of profiting from resources, but some commit these acts for the sake of laughter. Therefore, only a private company can protect settlements from such lawless people.

Of course, blocking access should only be used in online play on large servers, since griefers simply do not exist in single player mode. To private a territory on a specific server, you will need to install the special Minecraft Bukkit plugin World Guard.

The meaning of a private home is to highlight the desired region. All selected parts of the terrain are cuboids. Consequently, the form of allocation of each section of the territory will be parallelepiped, and there cannot be other types. This can be done with just two points.

How to private a house in Minecraft on a server?

First you need to use the selection of one block: to do this, you need to press the left button and hold the wooden ax in your hand (the //wand command makes it possible to receive an ax endlessly). The same thing is done with the other block, only in this case the right button is used. As a result, the extreme points of this cuboid are formed.

Using this method is not entirely convenient, as it requires additional steps. It will be useful to have high pillars and dug deep holes, otherwise there will be no possibility of choosing the extreme point. To make the process easier, you should set certain commands:

• //expand length direction – this will expand the selected area in different directions.

For example: //expand 10 up – this will increase the circumference of the territory by 10 cubes from bottom to top.

• //contract length direction – decrease the selection of an area in the specified direction.

Let’s say: //contract 12 down – the salience of the site has decreased by 12 cubes from top to bottom. You can also choose the following direction: me, down, up.

The presence of the first parameter makes it possible to change the direction where our gaze is directed. The next two are down or up. By choosing the me direction, you reduce the region by the desired value from yourself. In order to reduce the area from bottom to top, you need to specify the direction up, thereby the value of the lower border will be at the top. It is possible to use the third argument down. With it you can easily reduce the selection from one side to the other. There is also a command to precisely shift the selection:

• //shift length direction.

For example: //shift 5 down – the selected area will shift 5 blocks down.

There are commands that can be used to select blocks at a distance:

1. //hpos1 (replaces left click);
2. //hpos2 (replaces right click).

These commands are useful because due to them, the appearance of extreme points is carried out in blocks that are located outside the cross located in the central part of the monitor. As the area's salience changes, the chat will show the number of coordinates of the outermost block and the value of the blocks in the selected part at a given time. Once a private area has been identified, you can give it any name. This can be done using the command:

• /region claim region name – will help save the cube as a locality along with the selected name.

In principle, after using all these commands, the area can be considered secured. But you can apply some more settings.

Each private has its own owners (owner) and their users (member). Any owner can change the properties of his area, and other owners and ordinary users can be added by his invitation. The latter have completely different functions. They are able to build and destroy, and also use doors and chests. That is, they do only what is allowed in non-private areas. Every region, even at the stage of creation, acquires the status of owner. The following commands will help you add a player to the category of territory owners or users:

• /region addowner region nickname1 nickname2, etc.
• /region addmember region nickname1 nickname2.

For example: /region addowner MyLand BestIsland or /region addmember MyLand BestIsland. To remove added players, you need to enter the following commands:

• /region removeowner region nick1 nick2;
• /region removemember region nick1 nick2.

Alternatively: /region removeowner MyLand BestIsland. Or write: /region removemember MyLand BestIsland.

Let's look at a real example

Two friends chose a server to play Minecraft and started playing there. In a short time they managed to develop the area. One of them decided to make it private in order to protect himself from unwanted guests, as well as to preserve the resources and buildings in their original form. To do this, he entered the command /region claim and added his name. He immediately listed his friend as the owner of this area: /region addowner. Everything was going well for them.

But one day they thought that the settlement needed to be further developed. Therefore, two more players are invited to help in this difficult matter. To avoid the risk of losing their property, they decided to add them as users: /region addmember - and entered their names. After players were added, the chest of diamonds was emptied. Everyone thought that their assistants had done it. Immediately measures were taken in the form of the command: /region removemember - assistants ceased to be private users.

Soon the main owner finds out that his friend, whom he invited first, is guilty. After that, he removes it as the owner: /region removeowner and writes the name. From this moment on, he is the sole owner of his settlement and decides what to do.

Conclusion

Note! It should be remembered that the allocation of someone else's private territory, as well as the coverage of more than 50,000 blocks of terrain, is strictly prohibited.

Only the correct and meaningful use of the commands highlighted above will help protect your possessions from vandals of the gaming world. Write your comments and wishes, and also share the information received with your friends. Thank you!

Video

We are waiting for your comments, feel free to write!

.

Every starting player should know;
What is private territory or how to private a house in Minecraft
otherwise, you can lose everything you have acquired, this is not a single-player game where only you and you play! There are many different people on Minecraft servers and
Not everyone has good intentions.

To prevent this from happening, let’s take a closer look at what it is

Private territory in Minecraft

To private territories in Minecraft you will need; a stack of any blocks and a wooden axe, the ax actually for the private, and the blocks to build a pillar under you to mark the second highest point. You will have to dig up the blocks, but wooden ax for private you can get it by writing a command in the chat //wand and pressing Enter.

And so, you have dug up the blocks, you have a wooden ax, now you need to find an area to build a house and secure it.

When choosing an area for your home, pay attention to nearby houses, as their privacy may interfere with your future privacy, giving an error like
.
Having chosen a place for a house, imagine approximately what it will be like for you and move on to private.
They will private the territory diagonally, as shown in the picture.

How to make a private in Minecraft

So that you know how to make a private call in Minecraft, I’ll describe it in detail. Having chosen the territory, we prepare to mark the first point, make a deepening,
(the depth depends on how far you go down when building the house, often a basement is built under the house, so this also needs to be taken into account)
and left-click to mark the first private point.
Next, we go diagonally along your chosen territory and begin to build a pillar,
(the pole should be at least 5 - 6 blocks higher than your future home) and right-click on the second private point (right the block you are standing on).


Having marked both points, we write the private command /region claim [region name],
for example: /region claim dom7, then press Enter,
at the same time, a recording should appear in the chat
Region saved as dom7, in your case instead of dom7 the name of your region.

That's all! Your territory is secured!

How to check private in Minecraft

I think everyone knows how to check private skin in Minecraft.
Therefore, we take the skin in our hands and check the correctness of the private message,
This should be the entry:

If everything is fine, let’s start building the house, not forgetting
set a dot at home using the /sethome command.
Also, when building a house and after completion of construction, check all corners with leather for the presence of privacy.
But if this message does not appear, then a reason should appear in the chat
failed to privatize the territory.
Possible reasons and their solutions.
The selected region touches another region
You'll have to look for where exactly your region comes into contact with someone else's private network.
You have exceeded the region limit - you have marked more than 30,000 blocks
Help: By purchasing, you increase both the size and number of private regions.
Reduce the size of your region
You have used all your regions (it’s different for everyone, we have 3 regions available on our servers)
What are you doing here anyway?).
I am sure that everyone understood how to private a house in Minecraft,
and yet, for those who are in the tank, I advise you to also watch a video about private.
Private house in Minecraft

Commands for private in Minecraft

.

The main team for private territory in Minecraft
/region claim [Region name] - Create a region.
(All this is written separated by a space and without parentheses)

How to add a friend in private

When wondering how to add a friend in private, you should remember;
Prescribing | By adding a friend or someone else to your private account, you are endangering both your home and your property!
Since after adding your “friend” can simply break everything, you are solely responsible for this action! The administration will not return anything to you and will not help you in any way, so think about whether you should add someone to your private account.
/region addmember [Region name] [Player nickname] - Add a resident to a region
(Nicky names separated by a space if there are a lot of people).
/region addowner [Region name] [Player nickname] – Add owner to region
(just like you will be able to manage the region)
/region select [Region name] -Select the selected region.
/region info [Region name] - View region information.

How to delete a region in Minecraft

- Removing private.

If you decide to expand a region or move, you should know how to delete a region in Minecraft. There is - if a house does not have a private one, then it is no one’s and any player has the right to take it or break it, so remember;
Deleting a private account will lead to the loss of everything acquired!
/region remove [Region name] -
/region delete [Region name] - Delete the region you created.

How to remove a friend from private

To remove a friend from private, you need to know the appropriate commands.
/region removemember [Region name] [Player nickname] - Remove a resident from private.
/region removeowner [Region name] [Player nickname] – Remove owner from private.

That's all! Now knowing the commands for private territory, your territory will be under reliable protection. Build houses, fortresses and castles, create clans and guilds, play for fun on servers.

Having mined and accumulated a lot of different materials, and installed everything necessary for life in it, for example, a bed, a TV and other interesting objects, it is only natural that you want to protect them from attacks by other players.

It is very important to ensure not only the safety of your home, but also to prevent chests from being opened and diamonds stolen. Naturally, all this can be hidden, surrounded, and housing can be built in a hard-to-reach place. But the most effective method of protection is the privatization of territories.

What you need to privately own a territory in Minecraft

To secure something, you need an axe. To make it, you need to put three boards in the crafting window in the upper left corner, and two sticks in the middle cell and the cell below it. This way you will be able to craft a wooden axe. But if you replace the boards with cobblestones, gold or diamonds, you can get a stone, gold or diamond tool, respectively.

How to privatize territory in Minecraft

To make it private, you must determine the approximate size of the territory you want to make private. You should go to the starting point of the privatized area and click on the selected block with the left mouse button so that the inscription “First position set” appears on the screen. Next, you need to proceed to the next point and click on the right mouse button. You also need to select the top and bottom points.

Minecraft has special commands that allow you to privatize an area. Thus, /region define(/region redefine) is used to change the private zone. The /region claim request allows you to assign a region to yourself. The inscription /region select selects a region. To view information about , you need to enter /region info.

Not only you, but also your friends in Minecraft can use the acquired items. The /region addowner(/region removeowner) command allows you to change the owners of a region. By adding a friend to this list, you can give him exactly the same rights as you. To view a list of all the territories you have claimed, you can enter /region list.

You can change the dimensions of the welded area in height using the command //expand<кол-во кубов> <направление>. To select the height and depth of the private, you need to enter the appropriate number of blocks, and to determine the direction, the English words down - down, up - up are used. You can delete a private by entering the phrase /region remove<имя зоны>

Thus, having learned how to privatize a territory in Minecraft, you can safely build beautiful houses, hide the acquired wealth in them, and close chests from access to strangers. You can also form teams with friends and ensure shared use of private areas.