How to set up a universal remote control for a TV from a smartphone? . How to set up a universal remote control? Where is the power button on the remote?

26.11.2023

Equipment manufacturers try to provide each of their devices with a remote control so that the user can conveniently use their products. You don’t need to get up to turn off the lights, adjust the air conditioner, fan, or turn on/off the TV; you can do everything while sitting on the couch. This is, of course, convenient, but over time, coffee tables become cluttered with different remote controls, which creates a certain amount of confusion and irritation.

If you don’t yet know that there is a universal remote control that can be configured to control several devices at once, then in this article we will tell you about all its capabilities and provide instructions on how to use it and how to configure it correctly.

If you have become a happy user of digital television, then a new device with a remote control has appeared in your apartment - a set-top box-receiver. And in order not to add another remote control to your everyday life, let's figure out how to use a universal remote control.

Despite all the breakthroughs in technology, remote control devices have not changed at all. They may have different shapes, but the design of any remote control still consists of a housing, an electronic circuit, buttons, LEDs, and an autonomous power supply.

The universal remote control has an identical internal structure, only it can be configured to control several devices at once. For example, having purchased such a device, you can put the television, set-top box and multimedia remote control in the closet, and register all their functions in a universal remote control.

Can any remote control be universal? No. Although they are similar in appearance, their internal electronic circuitry is different. Only devices designed for this purpose can be configured to control multiple devices.

The difference between the original and universal remote control

A TV remote control, for example, a Tricolor TV, is a useless device in itself; it can only be used in conjunction with another device - a television receiver, for which it was created.

The operating principle of the remote control is based on three actions:

When you press a button on a device, you mechanically activate a microcircuit that creates a specific sequence of electrical impulses;
The LED element of the remote control converts the received command into infrared radiation with a wavelength of 0.75-1.4 microns, and sends the signal to the associated device;
The TV has a phototransistor that detects this IR signal and converts it into its own electrical impulse, transmits it to its control unit, due to which the command you have given is executed.

The communication method used in remote controls is called PCM, or Pulse Code Modulation. Its peculiarity is that each command is assigned a separate 3-bit sequence, for example:

000 – turn off the TV;
001 – select the next channel;
010 – return the previous channel;
011 – increase volume;
100 – reduce volume;
111 – turn on the TV, etc.

That is, when you press a button on the remote control, the electronic circuit turns on the IR LED in accordance with a given pattern: “111” - ON, ON, ON, with a clear signal step length, for example, 3 milliseconds. If you selected the volume button, which has code 011, then the LED will perform three such actions with a predetermined delay: turn off, turn on, and turn on again.

There are three different types of remote controls on the market:

Original;
Unoriginal;
Universal.

Original and non-original remote controls are control devices created for one specific model of technical devices. The only difference is that the first type is produced by the native manufacturing plant where the TV itself was assembled, while non-original remote controls are produced by different companies under license.

Universal remote controls (UPDU) are learnable control devices that:

Can be customized;
Suitable for many TV models;
Can be used instead of a lost remote control for any technical device.

A universal remote control can be chosen by shape, size, color, design, depending on personal preferences. Inside such a device there is a special program and a special code base that allow you to determine signals from almost any TV.

The most common brands of universal remote controls are Supra, Huayu and Beeline.

How to find out the TV code

To set up a universal remote control for your TV, it is advisable to know the three- or four-digit code of a specific model. You can find such codes either in the technical data sheet of the TV, or on the website of the equipment manufacturer, or in special ones. That's what it's called - “Code for setting up the remote control”.

But how to set up the remote control for your TV if you couldn’t find the right model code for your model? For this purpose, each UPDU has an automatic configuration function with software code search. Simply press the desired combination of numbers, after which the auto-selection command will start.

Setting up universal remote controls

The first step is to insert power supplies into the remote control. Some remote controls are sold without batteries, so you will have to buy them additionally. You can stop at batteries, or you can immediately purchase rechargeable batteries. The second option will cost more, but they can be recharged hundreds of times from the network.

Then turn on the TV with which the remote control will be paired. On the remote control, select the desired mode: TV, DVD, PVR or AUDIO (to set up the TV, use the button "TV"). Hold the button for 3 seconds until the indicator on the front panel of the device lights up.

But the next steps will be different: if you do not know the model code of your TV, then proceed to the next section of automatic setup, and if you know the code, then read the instructions for manual setup.

Automatic

On the digital panel of the remote control, dial the number “9999” without removing your finger from the “9” key until the TV receiver turns off. After this, the automatic channel selection procedure will begin, which can take up to 15 minutes.

This method is used if the code for your device brand is not in the list of brands. However, if a conflict of control buttons occurs (the function of one button applies to several devices), then their correction will be impossible if a search was launched across the entire database (combination “9999”).

In different models, the combination of buttons may be different; it is better to look at the information on the packaging of the remote control or in the instructions supplied with it.

To configure the SUPRA remote control (Supra), which is most often used to control LG, Samsung or Philips TVs, the algorithm will be as follows:

Turn on the TV;
Point the remote control at him;
"Power" and hold it for 5-6 seconds until the LED lights up;
Wait until the volume icon appears on the screen. Try changing the sound setting, if the TV responds, then the setup was successful.

HUAYU remote control is configured according to the following scheme:

Turn on the TV;
On the remote control panel, press the button "Set", followed by a button "Power", and then release both buttons at the same time;
Press the key again "Power";
Make sure the volume symbol appears on the screen;
To exit programming mode, press the key 2 times "Set".

There is also a third auto-tuning option, implemented in some models of universal remote controls:

Turn on the TV;
Click the button "TV" and hold it until the LED lights up;
Press and hold the button "Mute" to connect search;
Wait for the process to complete and check the operation of the remote control with any command: if the TV responds, it means the remote control is configured successfully.

Manual

All TVs have their own pairing code, and knowing it, you can quickly set up a universal remote control. Find out your model code and do the following:

Turn on the TV receiver;
On the remote control, hold down the button "Power" and, without releasing it, enter the code of your TV model;
When the device LED blinks 2 times, release the button. "Power".

To enter programming mode, press two buttons simultaneously: "Power" and “Set” and wait until the PU indicator is constantly lit;
Enter the four-digit code;
The indicator should go out, exit using the “Set” button.

UPDU Beeline

Turn on TV;
Press 2 buttons: “C” and “Setup”;
Wait until the initialization is completed and after the indicator blinks 2 times, the buttons can be released;
The functionality is checked using the “Vol” button.

If you do not have time to enter the code within one minute, the TV will be switched to normal mode and you will need to start the setup again.

No code

You can also set up a universal remote control to control your TV by searching for a code. To do this, follow these steps:

Turn on the TV and point the remote control at it;
Press two buttons at the same time: "TV" And "OK". Keep them active for 2-3 seconds until all the remote control buttons light up. Wait until only the number buttons remain lit;
Slowly press the channel button "CH+" until the TV turns off, this will mean that the code has been selected;
To save the settings, click the button "TV".

Please note that the code selection speed for each television model is different, so when pressing “CH+”, wait a couple of seconds to have time to notice the reaction of the television receiver.

Smartphones with universal remote control function

Did you know that the latest models of some smartphones already have a universal remote control function? You don’t have to buy another remote control, but simply set up your phone to control all the devices in your apartment, but only those that have the SMART option.

To set up a universal remote control on your smartphone, you will have to visit the Play Store and download the mobile application. There are many of them, so read the reviews and install the one that suits you best.

After starting the program, you will be offered a list of equipment (set-top box, media streamer, TV, player, smart home, etc.). Choose what you want to control. Next you will need to indicate the manufacturer and pairing method (Wi-Fi, Bluetooth, infrared).

The program will start searching for equipment, and as soon as you see the name of your equipment on the phone screen, select it. A special confirmation code will appear on the TV display, which you will have to enter into the program on your smartphone. Now you have in your hands not just a phone, but also a control panel.

This installation is extremely simple and straightforward. All instructions appear sequentially on the phone, and all you have to do is confirm your actions. For such a setup, you do not need to know the code and automatic search is also not required. Remote communication is established using the selected wireless communication technology with specific devices in your apartment.

Having a single control panel for all equipment in the house is very convenient. And as you understand from our article, setting up a universal remote control is quite simple and quick.

Note.

The TV-139F universal remote control can work with old and new type TVs, well-known domestic or foreign brands. IT is suitable for many types of TVs. Function key combinations are programmed into the remote control. This will help if your original remote control is lost, damaged or when you want a new one.

Option one. Automatic setup.

Press the “SET” button and hold it until the red diode lights up very brightly (about 5 seconds). After this, press the “Power” button with a short press - the remote control will begin to automatically go through all the codes embedded in it, which will be symbolized by a flashing diode. We point the remote control towards the TV and observe its (TV's) reaction. When the remote control selects the desired code, a volume control icon will appear on the screen. Immediately press the “MUTE” button again - the remote control is configured and you can use it..

How to find out what code you have set on the remote control.

Press “SET” then button 1, release both buttons at the same time and watch how many times the LED flashes. For example, if it blinked 2 times, the first digit of the code will be 2. If the red LED did not blink, then the code digit is 0.

Then press “SET” and then button 2, release both buttons at the same time and watch how many times the LED flashes. We write down the value of the second digit of the code, for example 1.

Similarly, we determine the code number with button 3.

Option two. Manual setting.

For this option, we will need codes embedded in the remote control, which were not included in my delivery kit. Fortunately, with the help of the Internet you can find anything.

Its essence boils down to the following: press the “SET” button and hold it until the red diode lights up very brightly (about 5 seconds), then enter a three-digit code that matches the model of your TV. The diode goes out, we check the operation of the remote control. If everything works as it should, we leave everything as it is; if not, we repeat the procedure with another code.
Option three. Semi-automatic.

Press the “SET” button and hold until the red diode lights up very brightly (about 5 seconds) then enter code 000. Again, activate the setup mode by long pressing the “SET” button and begin to go through the codes in semi-automatic mode - by pressing the increase button volume until volume adjustment appears on the screen. If you wish, you can count each press, then next time you will know which code you need to enter when setting up the remote control in manual mode. The process is not very fast, but effective.
Of course, adjustments to the desired TV are required; more details are shown in the video.

Why does a smartphone need an infrared port? To make a TV remote control! We will tell you how this is done in this practical material.

What will you need to create a universal remote control?

The technology of remote control of equipment from a mobile phone is by no means new. Back in the days of widespread infrared ports for cell phones, there were Java midlets and applications for Symbian that allowed you to switch TV channels. With the proliferation of smartphones, IR technology has seemingly become a thing of the past. But she quickly returned: “smart homes” and the “Internet of Things” came to the world. Infrared ports have begun to make their way back into phones as the mobile device has become a single control panel for smart home appliances.

However, new technologies have also been added, more typical for smartphones. For example, Wi-Fi, with the help of which modern smart technology is combined into a single home network. Taking into account the above, it is very simple to make a universal remote control for your TV and other household appliances from your smartphone.

To do this, one of the conditions must be met: Either your smartphone must have an infrared port (or an IR module connected to a 3.5 mm connector or microUSB);

Or your home appliances must have built-in Wi-Fi modules to pair with your smartphone. Next, you will need to install one of the applications presented below. And that’s all - you can connect your equipment to your smartphone for remote control.

Let's look at two of the best applications for creating a universal remote control. Both apps are free, available for Android and iOS, and support both IR and Wi-Fi control.

The application can replace remote controls for TVs, Smart TVs (LG and Samsung), cable and digital set-top boxes, air conditioners, Roku, Apple TV and Chromecast media players, AV receivers, home theaters, CD and DVD players, projectors, as well as home automation , for example, LED lighting. The setup is simple: install the application, select the connection type, device type, start the search, connect to the found devices and control them using intuitive buttons on the screen.

SURE also allows you to organize a so-called device system at home, within which several devices in one room (for example, a TV, AV receiver and video projector in the hall) are combined into one group. After that, you can turn them on by pressing one common button in the application. Important: the same system can only include IR or only WiFi devices. In addition, the application allows you to transfer photos, videos (including streaming) and audio from your smartphone to connected devices through the built-in player. Thus, you can view your mobile gallery on a big screen, “stream” movies from your smartphone directly to your TV, or listen to your tracks on your home stereo system. Finally, SURE Universal Remote allows you to control equipment not only by pressing buttons on the smartphone screen, but also with your voice using the Alexa Voice voice command conversion system.

Download Sure Universal Remote - AppStore

The application can control air conditioners, TVs, digital and satellite set-top boxes, projectors, DVD players, amplifiers, fans (!), robot vacuum cleaners, SLR cameras, LED lighting and much, much more. Setting up the application is also intuitive. We install, select the device type, look for its model and start the connection. The main advantage of the application is its huge base of devices. It contains more than 6,000 brands of household appliances and about 80,000 supported remote controls. All this is available in the application even offline. But even if your device is suddenly not in the database, this is not a problem. The intelligent search built into the program allows you to read the device ID and search for its model on the Internet, and will also independently select for you a remote control compatible with it from those available in the online database (and there are more than 250,000 of them). And even if you are a radio amateur and assembled the device with your own hands, you can register it in the application database and, after a short adjustment, control it from your smartphone, choosing the remote control to your liking. To do this, the application has a DIY function that allows you to catch an IR signal from your radio-controlled device and configure the remote control for it.

Random joke:

Setting up a Beeline universal remote control

Detailed instructions for setting up Beeline universal remote controls with the Setup button. See simplified instructions on the main page

Beeline universal remote controls are configured by default for Motorola set-top boxes. But there are many other models and it’s not a fact that you will get exactly the Motorola. If they brought you another console ("Pussy" (Cisco) for example), you must first bind it to the remote control, otherwise nothing will work. A valiant beeline installer MUST configure the remote control, but, as practice shows, often he simply does not have enough time to do this (don’t blame the poor guy, they are already driven like dogs), or you decide to do everything yourself. It is for such cases that this article was written.

× Attention 1!

Follow the instructions carefully. If you thought too long and did not enter the code for 4 or more seconds, the remote control goes into normal standby mode. If you suddenly did something wrong, don’t worry, you just need to. More on this at the end of the article.

× Attention 2!

This article fully applies to the new Beeline universal remote control. It is easy to distinguish by its appearance - the remote control is always black, as in the above figures, at the bottom there is the Beeline logo, the " button SETUP"located at the top of the remote control under the button" MENU".
In extremely rare cases, you may encounter an outdated AT6400 model remote control without a " key SETUP", or MXv3 models with " key Learn" instead of " SETUP". The color of such a remote control can be either black or light. The connection of the remote control to the model is easy to determine - in the lower part of the remote control there is a logo" Beeline"the logo of the console will be located" Cisco"either" Motorola".
Remote controls in this series are tied only to their console and will not control another (i.e., a remote control with the Motorola logo will not work with the Kisko console and vice versa). But you can still set up such a remote control to control the on/off and volume of your TV. A detailed article about such remote controls is here:

× Addendum 2017

Since the new year (2017), Beeline began installing new generation set-top boxes - Jupiter. One of the advantages of this miracle is a huge terabyte screw, and one of the obvious disadvantages is that the firmware for them is still damp. Very. Plus, you only need your own remote control; a regular universal one will not work. Below is the link for complete instructions on setting up these consoles:

Setting sequence:

Unlike its predecessors, the new Beeline universal remote control (with a setup button) is extremely simple and reliable to set up. If you strictly follow the instructions, setting up and linking such remote controls does not cause any difficulties. So let's get started:

Tied to pussy(Cisco):

Turn on the TV! ;)
Press and release the button STB.
Press and hold the buttons AT THE SAME TIME SETUP And C, WAIT!
When the button STB SETUP And C.
We use it :)

Linking to Motorola(Motorola):

Turn on the TV! ;)
Press and release the button STB.
Press and hold the buttons AT THE SAME TIME SETUP And B, WAIT!
When the button STB blinks twice, release the buttons SETUP And B.
Press the volume button (optional, just to check).
We use it :)

We tie it to Tatung(Tatung):

Turn on the TV! ;)
Press and release the button STB.
Press and hold the buttons AT THE SAME TIME SETUP And A, WAIT!
When the button STB blinks twice, release the buttons SETUP And A.
Press the volume button (optional, just to check).
We use it :)

How to bind the volume control key to the TV:

Turn on the TV!
Point the remote control at the TV.
Press the button SETUP, WAIT.
When the button STB blinks twice, release SETUP.
Press and release the button TV.
Make sure the button TV blinked 2 times.
Use it.

× Let me clarify to clear up any possible questions.
By default, the universal remote control controls the volume of the STB (when the key is active STB). The active key is very easy to determine; it flashes briefly when you press any button on the remote control. Now, after our movements, the remote control can also control the TV. But for this to happen, you need to activate the mode TV by clicking on TV. After adjusting the volume and other TV settings, you need to press again STB to return to the control mode of the Beeline set-top box.
This seems obvious, but very often people simply forget to switch modes TV/STB and are at a loss as to why the remote control doesn’t work :).

How to bind the volume control key to the Beeline set-top box:

By default, the volume key on the universal remote control is always tied to the set-top box, but just in case :-)

Press the button SETUP, WAIT.
When the button STB blinks twice, release SETUP.
Press the volume up button.
Press and release the button STB.
Make sure the button STB blinked 2 times.
Use it.

Automatically configure the remote control for full TV/DVD control:

If you want to not only control the volume of your TV or DVD set-top box, but also enter the native service menu using a universal remote control, you need to “introduce” them, i.e. “link” the universal remote control to the TV or DVD. After this operation, the original TV remote control is, as a rule, not needed at all.

Turn on the TV or DVD!
Press and release the button TV for TV, DVD for DVD.
Point the remote control at the TV or DVD.
Press the button OK(in the center of the console), WAIT.
An automatic search for control codes for your device will be performed. During the entire process, keep the remote control within sight of the device! When the process is finished, the device (TV or DVD) will turn off.
Release the button OK.
Use it.

Manually setting up the remote control for full TV/DVD control:

There are two ways to bind the remote control - manual and automatic. I recommend using automatic - it’s easier and more reliable. If the automatic search does not produce results (which happens extremely rarely), you can use the code table. Look for your device in the table and enter the code (4 digits)

Turn on the TV or other device - TV- TV, DVD- DVD set-top box, AUX- amplifiers, VCRs, etc.
Point the remote control at the selected device.
Press the button SETUP, WAIT.
When the button of the selected device blinks twice, release SETUP.
Enter the device code from the code table.

If the code is successfully entered, the button of the device being configured will blink twice.

If the code is not received within more than 4 seconds, the remote control will return to standby mode. In this case, repeat the procedure from point 2.

Use it.

Reset to factory settings:

If something goes wrong, or you have gone too far with the settings, you can always reset the remote control to factory settings. But keep in mind that in this case, the universal remote control will by default be configured for the Motorola prefix. If your set-top box is a different model, you will need to reconfigure the remote control to it. So, reset:

Press and release the button STB.
Press the button SETUP, WAIT until it flashes 2 times, release the button SETUP.
Press the buttons one by one 9, 7, 7 .
Button STB will blink four times to indicate that the remote control has returned to default settings.

(To enlarge the image, move your mouse cursor over it)

Instructions for setting up a universal remote control in PDF from Beeline:

And finally, instructions for setting up the Beeline universal remote control in PDF from Beeline itself.

A universal TV remote control may be needed for various reasons.

For example, to control multiple screens or due to a breakdown of a proprietary device.

In this article, we will briefly and simply explain how to set up a universal remote control and where to find codes for your TV.

What is a universal remote control

It sounds complicated, but in fact, it is a simple device that creates signal pulses suitable for most TVs and set-top boxes.

Huayu, Gal, DEXP, Supra are considered popular and high-quality manufacturers of UE.

The universal model will fit a large number of common and popular manufacturing companies, for example, Samsung, LG or Philips.

Differences from a regular remote control

The original remote control and the universal one have two significant differences, which significantly increase the cost of the first - this is its “branding” and quality.

A remote control made by the owner-manufacturer is undoubtedly of higher quality than a Chinese one. However, if the TV is already 5-6 years old, then you will not be able to find a branded remote control for such an old model.

How to find out the TV code?

The code is necessary to be able to connect third-party devices with it. These include remote controls, smartphones or tablets.

It ensures device recognition and correct operation. It consists of a unique set of numbers that can be recognized also on the TV itself.
To do this you will need:

login to YouTube;
open settings;
select the option to connect to your phone;
after entering the “Connect manually” section, a blue code will appear;
remember it or write it down.

How to set up a universal remote control

Each device comes with instructions that describe the setup process in detail. We will look at setting up models from popular manufacturers.

Huayu

To configure it you will need:

turn on the TV, point the control unit at it and simultaneously hold down the power and “Set” buttons;
Watch the indicator carefully, it should be on all the time;
use the volume control to set commands;
To exit pairing mode, press the “Set” button.

Gal

Automatic adjustment:

turn on the TV, point the remote control at it;
hold down the button indicating the device type;
after the indicator lights up, release it;
press the power button on the UE, this will start an automatic code search;
As soon as the TV turns off, you must quickly press “OK”, this will save the code in memory.

Sometimes the automatic search does not work well, so you need to configure it manually.

Manual adjustment:

after turning on the TV and pressing the “TV” button, the indicator will light up;
releasing it, enter the device code;
after entering the fourth digit, the code will be saved in the device’s memory and the screen will go dark.

DEXP

Auto-tuning occurs according to the following algorithm:

turn on the TV, point the CP at it, press the button indicating the brand of TV;
hold down the “Set” button and hold until the indicator lights up;
click on channel selection, automatic code selection will begin;
Once the indicator goes off, immediately press the “OK” button to save the found code.

If the button is pressed too late, you will have to do everything again.

The advantage is that by searching through channels, you can regulate in which direction the search will be carried out.

Manual code entry must begin after pressing the “Set” button and the indicator lights up. Enter the numbers you found and click OK. The remote control will remember the specified combination.

Supra

Automatic configuration algorithm:

turn on the TV, point the remote control at it and hold the “Power” button, release after the indicator lights up;
If setup is successful, a volume control bar will appear on the screen
Turn off the device using the Power button.

Manual remote control setting:

find the code for your device in the previously mentioned article;
turn on the TV, point the CP at it, hold down the “Power” button without releasing it, enter the found code;
Only after the indicator blinks twice, release the power button.

If after setting up the universal remote control does not work, contact the seller or service center, there may be a defect.

First you need to double-check the codes and repeat the manipulations; sometimes mistakes are made during setup.

views

Save VKontakte